Front strange spindles,
Rear 12 bolt diff, outboard and inner bearings.
Anyone tried them?

Will Harrison??? You here?
Pm me

I was told before i switched to only do front wheels, and axle bearings. Was told by multiple people NOT to do carier/spool bearings because they WONT live.

I did see research on this a while back, my take away was it really wasn't worth it for a bracket racer and that the difference was negligible for the cost.

I have used them
On the front with zero issues, and on axles with only one ever cracking. I never tried them on the third member as I was advised against it as well

Thank you guys.

Zero issues in a floater hub

I have them but can't really give feed back. Only in front wheels. Have been told by 3 or 4 that ABA testing showed .02 when doing just front wheels. and at less than 300 bucks I figure is pretty good return on money. I do agree its not really needed in bracket car, but hey less rolling resistance should help with consistency .

Thanks Chris. I’m at 3620# to make class so anything that helps and easier to push in lanes...

Only in the front spindles, happy with the results.

Bob