DragRaceResults.Com    Bracket Talk    Bracket Talk Forum  Hop To Forum Categories  Tech Talk - by Abruzzi    msd belt driv e distribator wiring
Go
New
Find
Notify
Tools
Reply
  
msd belt driv e distribator wiring
 Login/Join
 
DRR Top Comp
Picture of wideopen231
posted
Have been looking for diagram of how the disrtibator is wired interanally. Want to b uilt one and machining it to fit current drive assembly. Need to now how it wired internal. Pics shot three wires orangemblack qnd green, Need to see where they connect.
.
Trying to gt system built to replce mags if sold. If have diagram or know where to connect wiring letr me know. Thanks




America home of free. Brought to you by 2nd amendment.
 
Posts: 4520 | Location: Greensboro NC | Registered: May 24, 2011Reply With QuoteReport This Post
DRR Sportsman
posted Hide Post
MSD belt drive distributor has no wiring. Its simply used with a crank trigger....
 
Posts: 130 | Location: Over here | Registered: November 28, 2007Reply With QuoteReport This Post
DRR S/Pro
Picture of David Covey
posted Hide Post
Chris, Stupid question maybe, but why not just use a distributor? Eliminate the possibility of belt failure. Not to mention you will have to have a oil pump drive anyway.

I run an offset distributor with a crank trigger.

Dave


"It is usually futile to try to talk facts and analysis to people who are enjoying a sense of moral superiority in their ignorance." -Thomas Sowell
 
Posts: 3348 | Location: American By Birth Texan By The Grace Of God  | Registered: April 29, 2004Reply With QuoteReport This Post
DRR Top Comp
Picture of wideopen231
posted Hide Post
Ok type this again. damn com pooters. I have gear drive for mag,fuel and vaccum off cam. Can send pics if send email. Or think I can.

Oil pump drive off cam like norm with a plug and shaft to kepp in place. Hell normal puiece to dang easy.LOL




America home of free. Brought to you by 2nd amendment.
 
Posts: 4520 | Location: Greensboro NC | Registered: May 24, 2011Reply With QuoteReport This Post
DRR Top Comp
Picture of wideopen231
posted Hide Post
Not actually going to drive off belt just need to build a liece to mount to drive hub,clamp with mag clamp and be ablble to mount mag cap base and cap with rotor spinning inside, Alrady have drive as said above

Will work same as belt drive piece,just figured more would be familar with the belt drive than explaining it was custom built piece. Oh now I have done that. Thanks David

This message has been edited. Last edited by: wideopen231,




America home of free. Brought to you by 2nd amendment.
 
Posts: 4520 | Location: Greensboro NC | Registered: May 24, 2011Reply With QuoteReport This Post
  Powered by Social Strata  
 

DragRaceResults.Com    Bracket Talk    Bracket Talk Forum  Hop To Forum Categories  Tech Talk - by Abruzzi    msd belt driv e distribator wiring

© DragRaceResults.com 2024