Bracket Talk
Engine Limiters

This topic can be found at:
https://drr.infopop.cc/eve/forums/a/tpc/f/80760912/m/6717096196

September 19, 2019, 11:37 AM
chasracer
Engine Limiters
What's the downside of not having engine limiters on a SBC mounted with aluminum front plate and steel mid-mount?
September 19, 2019, 12:28 PM
Bucky
I have never had s steel mid. But usually they crack the mid eventually


Foxtrot Juliet Bravo
September 19, 2019, 12:52 PM
David Covey
If there is enough movement it will drive the transmission into the driveshaft yoke and damage the transmission and or the rear end.
If not then it will flex and eventually cause damage to motor plate or mid plate.

Dave


"It is usually futile to try to talk facts and analysis to people who are enjoying a sense of moral superiority in their ignorance." -Thomas Sowell
September 19, 2019, 04:05 PM
Curly1
Yes, it will break all kinds of stuff. Can damage transmission a crank rear bearing and seal.


https://postimg.cc/gallery/np3zpruo/
"Dunning-Kruger Effect"
-a type of Cognitive bias where people with little expertise or ability assume they have superior expertise or ability. This overestimation occurs as a result of the fact that they do not have enough knowledge to know they don't have enough knowledge.

Before you argue with someone ask yourself, "Is this person mentally mature enough to grasp the concept of a different perspective?" If not there is no point to argue.

4X NE2 CHAMPION. 2020 TDRA NE2 Champion