Bracket Talk
Jegs 5/55 Drum Pump

This topic can be found at:
https://drr.infopop.cc/eve/forums/a/tpc/f/80760912/m/6717060286

October 15, 2018, 06:09 PM
Phil Dees
Jegs 5/55 Drum Pump
Anyone using this to pump methanol?
October 15, 2018, 07:47 PM
jrdragsdad
I do and love mine
October 15, 2018, 07:59 PM
Phil Dees
Does it fit the large bung on a 55 gal drum?
October 15, 2018, 08:02 PM
jrdragsdad
this part # 555-80231 yes
October 15, 2018, 08:15 PM
Phil Dees
Yes 555-80231.
October 15, 2018, 08:17 PM
Phil Dees
Looking to pump from 15 gal drums.
October 15, 2018, 08:22 PM
jrdragsdad
I have one of the Jaz 15gal jugs and 2 15gal drums. I use a two wheel dolly and ratchet strap to hold the drum/jug to it.
October 16, 2018, 05:14 AM
Phil Dees
I will be using the same basic setup.
October 16, 2018, 06:40 AM
Curly1
Here is another option I like.
https://www.harborfreight.com/...rrel-pump-93755.html


https://postimg.cc/gallery/np3zpruo/
"Dunning-Kruger Effect"
-a type of Cognitive bias where people with little expertise or ability assume they have superior expertise or ability. This overestimation occurs as a result of the fact that they do not have enough knowledge to know they don't have enough knowledge.

Before you argue with someone ask yourself, "Is this person mentally mature enough to grasp the concept of a different perspective?" If not there is no point to argue.

4X NE2 CHAMPION. 2020 TDRA NE2 Champion
October 16, 2018, 08:55 AM
Lenny5160
quote:
Originally posted by Curly1:
Here is another option I like.
https://www.harborfreight.com/...rrel-pump-93755.html


I've had this pump for a few years now. I'd never go back to hand pumping.

Not sure if I just got a bad one, but after about a year it started leaking at a couple pipe connections when pressurized. I took it apart once and tried RTV around some O-rings. Still leaks, but not enough that I worry about.


Tony Leonard
October 18, 2018, 11:29 AM
Roger McGinnis
quote:
Originally posted by Curly1:
Here is another option I like.


Not great for Methanol though. Unless you're running your air thru a dryer.



ΜΟΛΩΝ ΛΑΒΕ
October 18, 2018, 11:32 AM
Lenny5160
quote:
Originally posted by Roger McGinnis:
quote:
Originally posted by Curly1:
Here is another option I like.


Not great for Methanol though. Unless you're running your air thru a dryer.


I personally feel like that is an overblown issue. I use that pump, and both of my cars are put away for the winter with whatever fuel was left from the final pass. No caps or anything special. They will come out in spring and run the same number they just ran.


Tony Leonard
October 18, 2018, 11:45 AM
Curly1
My alcohol always tests good so I am not worried about it. But I do go through it fairly quickly and when I pump it out about 20 gallons at a time and put them in 5 gallon jugs.


https://postimg.cc/gallery/np3zpruo/
"Dunning-Kruger Effect"
-a type of Cognitive bias where people with little expertise or ability assume they have superior expertise or ability. This overestimation occurs as a result of the fact that they do not have enough knowledge to know they don't have enough knowledge.

Before you argue with someone ask yourself, "Is this person mentally mature enough to grasp the concept of a different perspective?" If not there is no point to argue.

4X NE2 CHAMPION. 2020 TDRA NE2 Champion
October 18, 2018, 12:05 PM
David Covey
quote:
555-80231

Looks like the Flofast pump with a Jegs sticker..

159.00
Flofast

I was a dealer for them when they first came out, still have mine.
Only issue I have with it is after sitting for a week the vanes dry out and it refuses to prime. I always leave a little alky in the hose and drain it back into the pump, no issues after that. Also, I must have a small air leak in the tube as when the fuel level drops below a certain point it doesn't want to pick it up.

One thing I love about it is I don't have to pick up a fuel jug. lol

Dave


"It is usually futile to try to talk facts and analysis to people who are enjoying a sense of moral superiority in their ignorance." -Thomas Sowell
October 19, 2018, 12:06 AM
Hotrod Corvette
quote:
Originally posted by Phil Dees:
Anyone using this to pump methanol?


Here is the 3 vane Professional version of the pump for the same money as Jegs

https://www.toolsid.com/flo-fa...l?singleid=151067464


Burt

I'm So Proud To Be An American And Not A Democrat...

October 19, 2018, 05:47 PM
Phil Dees
Thanks for the help guys. It looks like the Flo-Fast 51507 is the one I need.