DragRaceResults.Com    Bracket Talk    Bracket Talk Forum  Hop To Forum Categories  Tech Talk - by Abruzzi    sbc measurements
Go
New
Find
Notify
Tools
Reply
  
sbc measurements
 Login/Join
 
camaro77
DRR Sportsman
posted
can anyone provide me with the measurement from the water pump mounting surface to the back of the block bell housing mounting surface. I have looked online and can't find that measurement
 
Posts: 428 | Location: Bellingham MA | Registered: October 21, 2004Reply With QuoteReport This Post
rusty
DRR Pro
Picture of rusty
posted Hide Post
26.5 minus the distance from the water pump pulley to the block


thank you, president Trump
 
Posts: 1614 | Location: texas | Registered: February 17, 2006Reply With QuoteReport This Post
Canted Valve
DRR S/Pro
posted Hide Post
This should get you close.


Illegitimi non carborundum
 
Posts: 2496 | Location: OKC, OK | Registered: February 15, 2008Reply With QuoteReport This Post
CURTIS REED
DRR S/Pro
Picture of CURTIS REED
posted Hide Post
I have 3 different references saying it is 21.780"





.
 
Posts: 3588 | Location: KIEFER, OK. | Registered: August 17, 2007Reply With QuoteReport This Post
1leg
DRR Trophy
Picture of 1leg
posted Hide Post
I alway use 22" But I can measure tonight and let you know tomorrow.


Meziere Tech.
Make sure your water pump is on whenever you check your coolant level.
 
Posts: 319 | Location: Escondido | Registered: July 01, 2011Reply With QuoteReport This Post
camaro77
DRR Sportsman
posted Hide Post
curtis thanks this is what I needed
 
Posts: 428 | Location: Bellingham MA | Registered: October 21, 2004Reply With QuoteReport This Post
  Powered by Social Strata  
 

DragRaceResults.Com    Bracket Talk    Bracket Talk Forum  Hop To Forum Categories  Tech Talk - by Abruzzi    sbc measurements

© DragRaceResults.com 2026