I have been searching for a SBC timing set with a BBC snout. I have made a few calls with no luck.

Just type in Cloyes 9-3646BTX3

You'll find many for sale

I should have stated standard sbc cam location of
4.521

Cloyes Gear 9-3600btx3

About the best price I've found.....

https://www.amazon.com/Cloyes-...Timing/dp/B009EWJS08

Thanks you are alot better at this internet searching than I.

PM sent.

If you're using a degree wheel the bottom gear on this Rollmaster will make life easier on you.

This is a fairly new design from Rollmaster, I'm not sure if they make one like this with a Big Block crank snout yet but it could be beneficial for adjusting cam timing in tuning the cam timing in the car. In conjunction with the right cover, It be like changing cam timing on a JESEL belt drive.

Speedmaster cover like this would work good with that new Romac Rollmaster design for adjusting cam timing.

You can get a Speedmaster cover on Amazon $40.

4 allen head screws and you're adjusting cam timing. Cover comes off without pulling balancer.

Isn’t Speedmaster Chinese stuff?

quote:

Originally posted by CURTIS REED:
Isn’t Speedmaster Chinese stuff?

would you expect anything else ? they finally found the remains of that Chinese spy balloon that we shot down over the east coast . It wasnt a spy balloon after all . It was China air mail special delivery of race car parts addressed to somewhere in Madeira beach Florida ..

Ya'll watch too much mindcontrol fake news, that's how you ended up all vaxxed up.

Take it up with your *trusted* elected officials on why they de-industrialized the US and offshored its economy to china.

Now their gonna tell you they're at odds with china after building the chinese empire on the backs of US taxpayer dollars.

Are you buying that BS too?

It must be true if its on TV right?

That's how you ended up vaxxed, buying TV BS.

Propaganda

It's just about all chinese, by design.

American companies hiring chinese labor to manufacture. Ask your *trusted* officials how that happened. Not me, I'm not the one who did it to you.

Where do you think this cover is made?

Do you see anywhere it says made in USA?

It's made in China like just about everything, by design.

Ask your *trusted elected officials* how that happened.

You know why this doesn't say Made in USA anywhere?

Because it's made in china.

I use what I can get at any given time.

Try asking *trusted elected officials* you bend over for without a peep, how this happened Myodicurtis - aka Loser.

Speed Master is the old Pro Comp Electronics out of Australia.

They take and copy other manufacturers products and sell them as their own.

quote:

Originally posted by Tom Reyer:
Speed Master is the old Pro Comp Electronics out of Australia.

They take and copy other manufacturers products and sell them as their own.

People are clueless how this chinese manufacturing works.

Here's how it works.

Any company can go factory less, all they need is a blueprint of what they want manufactured or a product to hand a chinese manufacturing factory, to copy.

So if you're an American company, you shutdown your factory, layoff all your American or Australian employees and buy a plane ticket to china. China has the factory and labor to produce any product.

China can produce it in their factory using their labor, and you can bring it into the states with no penalty (tariff), 99% profit margins while not employing a single American other than yourself, and a salesman. No electric bill to pay, no factory or employee pensions to pay.

Ask your *trusted elected officials* how they wrote the laws that allowed that without being tried for treason, next time you get a chance.

Hell even GM and Harley Davidson have gone factory-less.

It's all fun and games until the US can't print money out of thin air anymore, replacing wages with expanded credit.

Do people actually think Jegs or Summit make the parts they brand and sell?

There is so much manufactured overseas and private labelled in racing parts, it's crazy.

Makes me laugh when people say "buy american" but have Moroso, Msd, Etc on their cars.

quote:

Originally posted by Tom Reyer:
Do people actually think Jegs or Summit make the parts they brand and sell?.

no . thats why I dont buy it

quote:

Originally posted by Mike Rietow:


I use what I can get at any given time.

I totally understand that part , If theres nothing American Made or Avalable for the application at hand , you have to do what you have to do to make it work or complete the job ..... BUT If theres American parts available I always try to buy AMERICAN ...

quote:

Originally posted by Tom Reyer:
Do people actually think Jegs or Summit make the parts they brand and sell?

There is so much manufactured overseas and private labelled in racing parts, it's crazy.

Makes me laugh when people say "buy american" but have Moroso, Msd, Etc on their cars.

JEGS house brand rockers are Harland Sharp and SUMMIT are Scorpion

Both are USA made.

Scorpion rockers are made 100 miles from the beach here in Ocala. I never thought much of em until I looked into them recently. They have the highest open spring pressure rating 950. Comp and Crane are rated to 750 open.

I bought a half set of 1.75 ratio BBC Scorpion rockers, they look bad to the bone. If they hold up I'll buy more, they kinda surprised me actually, they appear to be high quality rockers. I'm gonna run the dog crap out of em on the dyno in the next couple days.