February 27, 2019, 07:42 PM
Don RServicing vac pump Q?
I'd like to clean and inspect my 4 vane moroso pump but after removing the faceplate screws like the video I can't seem to get it apart. I've removed the fittings and can feel that the vanes are in but all I seem to get is a 1/16" or so. Ideas?
February 27, 2019, 08:04 PM
rustyremove the screws on the pulley end,take the center screw out on opposite end.it should come out then unless it sticks on the dowels. a little coaxing should do it
March 01, 2019, 03:53 PM
Don RThat was all I needed to do, it makes me feel a little dumb but there must be different designs. The video showed removing the rotor with the body left on the mount. The guy said there's nothing on the back to remove. Mine could be an older version.