DragRaceResults.Com    Bracket Talk    Bracket Talk Forum  Hop To Forum Categories  Tech Talk - by Abruzzi    Great service from Bullet Racing Cam
Go
New
Find
Notify
Tools
Reply
  
Great service from Bullet Racing Cam
 Login/Join
 
DRR Trophy
posted
I ordered BBC 60mm 7/4 2/3 swap cam from Bullet Racing Cam,They made a tool steel core and grind it in 8 weeks,Exactly what Chris said it would!
Now shipped to me in Sweden,Very Good Service!
 
Posts: 18 | Location: sweden | Registered: May 28, 2020Reply With QuoteReport This Post
DRR Top Comp
posted Hide Post
quote:
Originally posted by mathias:
I ordered BBC 60mm 7/4 2/3 swap cam from Bullet Racing Cam,They made a tool steel core and grind it in 8 weeks,Exactly what Chris said it would!
Now shipped to me in Sweden,Very Good Service!


Good deal...

Tool Steel,why? For bushed lifters?

Specs on cam? Confused
 
Posts: 9398 | Location: Madeira Beach Fl. | Registered: June 12, 2018Reply With QuoteReport This Post
DRR Trophy
posted Hide Post
Tool ateel because there is NO cores avaiable anywhere, BAM Steel DLC bushed .937 lifters
Intake
287 @.050”
.514” lobe lift, .976” with 1.9 rocker
Exhaust
312 @.050”
.500” lobe lift, .950” with 1.9 rocker
116 lobe separation
112 intake centerline
 
Posts: 18 | Location: sweden | Registered: May 28, 2020Reply With QuoteReport This Post
DRR Pro
Picture of Footloose
posted Hide Post
Can you send them another manufactures wiped out cam and have it redone? And about how much? I have used there cams for many years also flawless. And consistant.
 
Posts: 1922 | Location: in a van down buy the river | Registered: September 07, 2002Reply With QuoteReport This Post
DRR Top Comp
posted Hide Post
quote:
Originally posted by mathias:
Tool ateel because there is NO cores avaiable anywhere, BAM Steel DLC bushed .937 lifters
Intake
287 @.050”
.514” lobe lift, .976” with 1.9 rocker
Exhaust
312 @.050”
.500” lobe lift, .950” with 1.9 rocker
116 lobe separation
112 intake centerline


Wow, still eh?

Fuk'n incredible how the globalists have managed to turn the planet into one big third world shyt hole in a couple 2-3 years.

But that's globalism for ya, everyone, all regions suffer. No sovereign nations, just regions.

These cam grinders are starving for it.
 
Posts: 9398 | Location: Madeira Beach Fl. | Registered: June 12, 2018Reply With QuoteReport This Post
DRR Pro
Picture of Roger McGinnis
posted Hide Post
quote:
Originally posted by Mike Rietow:


Fuk'n incredible how the globalists have managed to turn the planet into one big third world shyt hole in a couple 2-3 years.

But that's globalism for ya, everyone, all regions suffer. No sovereign nations, just regions.


2-3 years???? We took a large turn in October 2000. We are being killed by 1,000 cuts, but no one is paying attention.



ΜΟΛΩΝ ΛΑΒΕ
 
Posts: 562 | Location: Republic of Texas | Registered: January 16, 2011Reply With QuoteReport This Post
DRR Sportsman
posted Hide Post
Bullet are good folks. Chris is a good dude and fellow racer...


"I am not ashamed to confess I am ignorant of what I do not know."
Marcus Tullius Cicero
 
Posts: 1031 | Location: Las Vegas, NV | Registered: April 14, 2004Reply With QuoteReport This Post



DRR Pro
Picture of SpeierRacingHeads
posted Hide Post
I have this on the shelf, no waiting! Smile Smile

 
Posts: 1420 | Location: Hays Kansas | Registered: January 23, 2006Reply With QuoteReport This Post
DRR Top Comp
posted Hide Post
quote:
Originally posted by SpeierRacingHeads:
I have this on the shelf, no waiting! Smile Smile



I had one just like it in a 355 cid 1967 Firebird I drove to high school early 80's. Vertigate shifter with a Muncie M22 / 5.13. Smile
 
Posts: 9398 | Location: Madeira Beach Fl. | Registered: June 12, 2018Reply With QuoteReport This Post
DRR Top Comp
posted Hide Post
quote:
Originally posted by Roger McGinnis:
quote:
Originally posted by Mike Rietow:


Fuk'n incredible how the globalists have managed to turn the planet into one big third world shyt hole in a couple 2-3 years.

But that's globalism for ya, everyone, all regions suffer. No sovereign nations, just regions.


2-3 years???? We took a large turn in October 2000. We are being killed by 1,000 cuts, but no one is paying attention.


Yeah, it has been hammer down last few years or so, I'M SURE you've noticed, starting with 15days to flatten the herd.

I'm all ears on October 2000?? WTO Trade deal with china? What?
 
Posts: 9398 | Location: Madeira Beach Fl. | Registered: June 12, 2018Reply With QuoteReport This Post
  Powered by Social Strata  
 

DragRaceResults.Com    Bracket Talk    Bracket Talk Forum  Hop To Forum Categories  Tech Talk - by Abruzzi    Great service from Bullet Racing Cam

© DragRaceResults.com 2024