DragRaceResults.Com    Bracket Talk    Bracket Talk Forum  Hop To Forum Categories  Tech Talk - by Abruzzi    Carb vent tube hose/filter kit
Go
New
Find
Notify
Tools
Reply
  
Carb vent tube hose/filter kit
 Login/Join
 
DRR Sportsman
Picture of Mike Frizie
posted
Can someone tell me if they make a kit, or what type of filter yall use for those of yall that have a hose connecting your vent tubes. I know some just cut a slit at the top. Thanks for any suggestions.


Michael Frizie
ET 2471
 
Posts: 638 | Location: Winston, GA | Registered: April 10, 2002Reply With QuoteReport This Post
DRR Elite
posted Hide Post
Michael why do you think you need it?
 
Posts: 13522 | Location: NJ | Registered: August 20, 2000Reply With QuoteReport This Post
DRR Top Comp
posted Hide Post
I use two spark plug boots and a piece of stainless tubing with holes drilled in it.

Why? Cause I think it looks cool.


Clowns to the left of me, Jokers to the right. Here I am.......
 
Posts: 5338 | Location: stuck in the middle with you! | Registered: March 11, 2002Reply With QuoteReport This Post
DRR Pro
posted Hide Post
What Mr. Cash is describing was known as a "whistle" by a racer named "Tuner" on speed talk forum. They are easily built by doing as he describes. I think they work well and see no downside. The idea is to vent the bowl without inducing turbulence.

In reference to a filter on the carb vents, I have never seen such except that a full-size engine air filter would serve the purpose.

And speaking of filters, I do think it is a good idea to filter the fuel cell/tank vent. This can be done with a simple, in-line fuel filter on the vent. I suggest at least a 3/8" [#6] line and filter.


Larry Woodfin



 
Posts: 1878 | Location: Kilgore TX | Registered: March 12, 2004Reply With QuoteReport This Post
  Powered by Social Strata  
 

DragRaceResults.Com    Bracket Talk    Bracket Talk Forum  Hop To Forum Categories  Tech Talk - by Abruzzi    Carb vent tube hose/filter kit

© DragRaceResults.com 2024