I've had both of my cars cut off recordings on the grid at approximately the same time, 1.2 seconds into the record or so. Multiple times, like a lot. Double checked all the settings I think but nothing stands out. Any idear's?
Remember this is on 2 separate cars, so leave out the loose wire, etc that could be 1 car specific
Mark Goulette Owner/Driver of the Livin' The Dream Racing dragster www.livinthedreamracing.com "Speed kills but it's better than going slow!" Authorized Amsoil Retailer
Posts: 1561 | Location: Back home in Alaska! | Registered: February 13, 2011
Even though you select Overwrite in the Data Acquisition / Settings tabs Grid does a poor job of this.
It is wise to select Download and Delete when retrieving DA runs from Grid. This way the card is always clean. They are on your computer and not needed in Grid.
I also recommend to set the Data Acquisition Status to OFF if not retrieving the DA periodically.
Posts: 2722 | Location: 53056 | Registered: December 30, 2009
Originally posted by markemark: The SD card is probably full.
Even though you select Overwrite in the Data Acquisition / Settings tabs Grid does a poor job of this.
It is wise to select Download and Delete when retrieving DA runs from Grid. This way the card is always clean. They are on your computer and not needed in Grid.
I also recommend to set the Data Acquisition Status to OFF if not retrieving the DA periodically.
Yep. I’ve had the exact problem and clearing off the SD card fixed it both times. Assuming you checked record duration and record triggers
Posts: 950 | Location: my own little world | Registered: July 20, 2005
