 |
 |
 |
|
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
|
Bracket Talk Bracket Talk Forum Tech Talk - by Abruzzi 2005 Duramax pushing water out the overflowGo | New | Find | Notify | Tools | Reply | |
| 2005 Duramax pushing water out the overflow | Login/Join |
| DRR Trophy |
Hoses cool to the touch means the water is not flowing....As mentioned earlier in post,check your thermostat.. | |||
|
DRR S/Pro |
The truck had been running for less than 10 minutes, which why it was still cold. But I will check them just to make sure. Got a couple of offers for $4k for my truck as is. Still debating on what I want to do. Bill Simpkins 74 Nova SBC 406 3240 pounds Speierracing heads 60 1.27 (10/16) 1/8 6.03@111 (10/16) Best 9.87@131 on the rev limitor 1 Feb 2013 nova quarterpanelview wheelie FTI Converter www.speierracingheads.com | |||
|
DRR Sportsman |
I could not agree more. Headaches are expensive. Oh the financial abuse. Good money after bad. Still have my 89 F350 with a Banks unit on it. I have a couple friends with the older ones with the head gaskets issues. Sent them down the road. They slept better too.. Out of sight, out of mind lol. Bad enough with The big ones here.This message has been edited. Last edited by: TD3550, | |||
|
| DRR S/Pro |
Well I got a update, I fired the truck and ran it for a bit, when I shut it down, I could hear a noise that turned out to be pressure getting past the cap. I went and got a new cap, along with one of those testers. Fluid start out looking like this,  Ended up looking the same.  So I filled up the cooling system, bleed it and drove it. It took a while to warm up and then it finally jumped up and stabilized. No more pushing fluid out. I plan on flushing the system this weekend, put some new thermostats in it and drive it like I stoled it and see what happens. Bill Simpkins 74 Nova SBC 406 3240 pounds Speierracing heads 60 1.27 (10/16) 1/8 6.03@111 (10/16) Best 9.87@131 on the rev limitor 1 Feb 2013 nova quarterpanelview wheelie FTI Converter www.speierracingheads.com | |||
|
DRR Pro |
I’ll give $4100 for it...  Glad you got it sorted out. Mikey | |||
|
| DRR Sportsman |
Most combustion leak detectors change color when carbon monoxide is present. Carbon monoxide is not a by product of diesel combustion. I used to be a people person, but people ruined that. | |||
|
| DRR S/Pro |
I'm not prepared to argue the chemistry, nor do I care to, however the item I referenced states: "Works with virtually any liquid-cooled internal combustion engine or generator with a closed cooling system including: gasoline, diesel, propane, natural gas and other alternative fuels." But maybe it's not like most, again, I'm not knowledgeable enough to debate the subject. Just repeating their sales pitch. Illegitimi non carborundum | |||
|
| DRR S/Pro |
The fluid that I got was made specifically made for diesel engines. The first fluid they brought specifically stated on the bottle, not for uses with diesel engines. Fluid Bill Simpkins 74 Nova SBC 406 3240 pounds Speierracing heads 60 1.27 (10/16) 1/8 6.03@111 (10/16) Best 9.87@131 on the rev limitor 1 Feb 2013 nova quarterpanelview wheelie FTI Converter www.speierracingheads.com | |||
|
| DRR S/Pro |
According to the internet diesels do produce carbon monoxide. | |||
|
DRR S/Pro |
The fluid in the testers was always blue in the ones I used going back many years. Gasoline burning engines | |||
|
| DRR Sportsman |
Take the cap off to let pressure out , Put cap on and crank up and let run for 60 seconds , turn off engine and remove cap slowly and see if you can hear any pressure coming out. It should not make any with the short run time. | |||
|
| DRR S/Pro |
I’ve seen quite a few caps fail and do exactly what Banjo said. I certainly hope it’s ok. Service the system and drive the he’ll out of it. California Screaming! Raceless in California! | |||
|
DRR Pro |
Banjo you need that little pinch clamp put back on that little hose. As it heats up air will seep around it. Also your heater core could be plugged up. After it reaches max normal temp. and turned off feel the radiator with your hand, feel to see if it is cold anywhere.I shoot everything with a heat gun looking for big differences Has someone ever put block or head sealer in there. It will clog everything up. Usually plugs the T.stat 1st. I am not convinced it is head related since you tested the pressure. Good luck. | |||
|
| DRR Sportsman |
You should be in good shape then. I used to be a people person, but people ruined that. | |||
|
| Powered by Social Strata | Page 1 2 |
 | Please Wait. Your request is being processed... |
|
Bracket Talk Bracket Talk Forum Tech Talk - by Abruzzi 2005 Duramax pushing water out the overflow
 |
 |
 |
 |
