Just received cam back that I sent out for regrind. Degreed it in and checked all numbers dead on. Good service, right on schedule and great to work with. Can't ask for much more.

Even went above and beyond some. Seems first cam I sent him was bent and had been welded before. The welding I had no idea of,the bent I should have checked.Upon thinking back it was cam that was in motor when I kicked two rods at VIR. Because of some event before race I thought it was something other than the engine and stayed in it 300 feet after the problem. Still ran 5.90 at 230, but it was a costly run.
Guessing cam got bent in that 300 feet of light bulb short circuit. Spent two weeks trying to fix cam.Then sent them second cam and he ground it as requested, Never mentioned any extra for work trying to save first cam.

Now how cam runs is all on me before everyone goes there. My specs and even had them change their recommendation to what I wanted after discussion on duration and why I wanted it less than they recommended on exhaust.

This message has been edited. Last edited by: wideopen231,