8mm blower pulley

November 27, 2019, 09:21 PM

imakehp

8mm blower pulley

Anybody have an 8mm lower blower pulley 45-55 (48-50 would be perfect)

November 28, 2019, 11:57 AM

jenavet

I tried to find some used over the summer and couldn't find any.i ended up buying new from good vibrations they where like 80.00 something a pulley...rbs superchargers wanted over 100.00 ea...once in a while these guys have some used ones also

November 28, 2019, 06:38 PM

Cashflow

Dave,

Let me check with a friend and I’ll get back to you.

November 29, 2019, 07:57 PM

imakehp

An update after inventorying my upper/blower pulleys.....I can use any lower/drive pulley between 44 to 60 tooth

December 02, 2019, 05:28 PM

Cashflow

Dave,

He didn’t have any. He sold them all.

December 02, 2019, 05:30 PM

seabass

I have one left , it was my lower one, I’ll look when I get home

J.R. Baxter

""Fathom the hypocrisy of a Government that requires every citizen to prove they are insured ..but not everyone must prove they are a citizen."

2025 Miller
Rolla Competition Engines
ProCharger
Hoosier Tires
Abruzzi

December 02, 2019, 07:02 PM

seabass

Mine is a 70 if your interested , alternator pulley and enderle crank snout also... have a couple crank hubs still as well if you need

December 03, 2019, 12:26 PM

Big Steve

Dave, not sure if you have figured out what belt you need yet but I have a 35 run Star Racer 1440 8mm belt that is in perfect condition I will let go for cheap if you need it.

December 03, 2019, 07:29 PM

imakehp

Thanks Steve...as soon as I get the block up on an engine stand and set the crank in I'll have a better idea what belt I'll be needing....

December 03, 2019, 07:39 PM

imakehp

quote:
Originally posted by seabass:
Mine is a 70 if your interested , alternator pulley and enderle crank snout also... have a couple crank hubs still as well if you need

J.R. the 70t pulley would work fine if I can find a 34, 35 or 36 tooth upper......I have several upper pulleys between 24 and 32 teeth though so I'm still hoping to find a 50 to 60 tooth upper....guess I'll go with whichever pulley(s) I find first....

December 03, 2019, 08:44 PM

BJs Wild Ride

quote:
Originally posted by imakehp:
quote:
Originally posted by seabass:
Mine is a 70 if your interested , alternator pulley and enderle crank snout also... have a couple crank hubs still as well if you need

J.R. the 70t pulley would work fine if I can find a 34, 35 or 36 tooth upper......I have several upper pulleys between 24 and 32 teeth though so I'm still hoping to find a 50 to 60 tooth upper....guess I'll go with whichever pulley(s) I find first....

December 04, 2019, 07:28 PM

imakehp

quote:

Yes?

December 05, 2019, 04:48 AM

BJs Wild Ride

You bracket racing a C rotor?

December 06, 2019, 12:13 AM

imakehp

quote:
Originally posted by BJs Wild Ride:
You bracket racing a C rotor?

Sure, I might if I get a wild hair up my a$$....But mostly I'm building an everyday impractical 1940 Ford with a blown 392(410) Hemi and a powerglide to waste money on back tires...