DragRaceResults.Com    Bracket Talk    Bracket Talk Forum  Hop To Forum Categories  Tech Talk - by Abruzzi    Cure for Tossing Fan Belts?
Page 1 2 
Go
New
Find
Notify
Tools
Reply
  
Cure for Tossing Fan Belts?
 Login/Join
 
DRR Pro
posted Hide Post
quote:
Originally posted by banjo:
Did you add that 4th bolt in there? I think that helps.


This is how the car came when I purchased it. There is 4.125” between the front engine plate and the back of the alternator bracket. The belt is 33.4” long.
 
Posts: 2671 | Location: 53056 | Registered: December 30, 2009Reply With QuoteReport This Post
DRR Sportsman
Picture of SonnyJames
posted Hide Post
“ I used a straight edge”
I had the same problem. Went to homecheepo and got some steel round stock that just sat into the pulleys but not too deep..just sat into pulley. Will show the misalignment I’m sure you have.
 
Posts: 680 | Location: Consistently researching inconsistencies | Registered: September 04, 2001Reply With QuoteReport This Post
  Powered by Social Strata Page 1 2  
 

DragRaceResults.Com    Bracket Talk    Bracket Talk Forum  Hop To Forum Categories  Tech Talk - by Abruzzi    Cure for Tossing Fan Belts?

© DragRaceResults.com 2024