Looking for indeustrial strnght epoxy for motorhome sides. We have an FL-70 with 24' box.The aluminum siding has turned loose on cpl seems. We use a supposed to be the greatest stuff ever epoxy when built. We can and may have to rivet it before all is said and done. Would rather avoid if can.
I have some work to do inside as results of seams opening and damage. Need to seal up outside first needless to say. Any suggestions on epoxy you have used or know results from other using?This message has been edited. Last edited by: wideopen231,
America home of free. Brought to you by 2nd amendment.
2 part that mixes in the gun you need to buy with the tubes I had a Motorhome that the hinge mounts came off of for the front access panel for the generator
X2 on the panel bond !!! I have yet to find something panel bond does not work well on LOL
Posts: 1422 | Location: Monroe twp nj | Registered: December 05, 2005
Originally posted by Top355x: Either panel bond as suggested or on the truck conversion pages a lot of people recommend 3m VFB or VHB tape not sure on exact 3 letters
Thought about that. Problem is panels mostly in place and with the tape you have zero adjustments after solid contact. The epoxy has a small window but should allow to adjust anything. Only problem with epoxy is keeping exposed part of panel being overlapped clean.
America home of free. Brought to you by 2nd amendment.
50 bucks if you get my father to go along with that, Since we built motorhome together using company funding its 50/50 deal. If never worked with father you have no idea how well that 50 bucks would be earned. Hell 500 would be under payment.LMAO
America home of free. Brought to you by 2nd amendment.
