can anyone share any pictures for a throttle return spring set up that will work with a INLINE throttle stop. I an having a very hard time finding a bracket that will work my old jegs set up does not work I have currently made up the moroso one that sits on the front carb stud but its rotating on my and causing the front accel put to be getting stuck down.

If you want to WIN throttle stop racing get rid of the inline stop and that solves your throttle return issue too

This message has been edited. Last edited by: 1320racer,

Would this type not work if you removed the back part to clear your stop but leaving the bolt hole part?

curtis that is what I had but I may have a fix to solve my issue buy making a new linkage to raise the back of the stop up some

quote:

Originally posted by 1320racer:
If you want to WIN throttle stop racing get rid of the inline stop and that solves your throttle return issue too

unfortunately ed I can't fit it under the current hood scoop so this was my only option until I can get a new scoop I just want to get comfortable in the car since its been blown up for 3 yrs

https://www.summitracing.com/p...mEAQYAiABEgKFG_D_BwE


This is what I use

quote:

Originally posted by camaro77:

unfortunately ed I can't fit it under the current hood scoop so this was my only option until I can get a new scoop

You don’t need a new scoop, just need to cut down the manifold and/or the plate stop. Exactly what I did to my manifold and stop to get it to clear the stock flat hood on my Firebird.

Ed can you post a picture of your intake and stop I’d like to see how much you had to take off

Thank you Ed