Cam Damage

December 04, 2023, 12:00 PM

BJs Wild Ride

Cam Damage

Small hydraulic roller for an LS street/strip type car. A lifter seized up in a different motor and machined .012 of the lobe. Would using this cam as-is be a terrible idea?

Dan "Jim" Moore
Much too young to feel this damn old!!

272" Spitzer
540 Chevy
The Blower Shop XR1
FTI XPM Series Converter
FTI Level 6 Powerglide
3.69@199
.916 60'

2017 Bradenton Heads Up Madness
Open Outlaw Champ

2018 PDRA T/D #5
2019 PDRA T/D #2

2020 Retired From T/D Competition....

2020 Bradenton NMCA Hemi Shootout Winner

2021 getting back into bracket racing with a Gen3 Hemi powered 87 Cutlass.

December 04, 2023, 05:39 PM

Curly1

I would not use it but you may be able to get it reground by Bullet or some others.

https://postimg.cc/gallery/np3zpruo/
"Dunning-Kruger Effect"
-a type of Cognitive bias where people with little expertise or ability assume they have superior expertise or ability. This overestimation occurs as a result of the fact that they do not have enough knowledge to know they don't have enough knowledge.

Before you argue with someone ask yourself, "Is this person mentally mature enough to grasp the concept of a different perspective?" If not there is no point to argue.

4X NE2 CHAMPION. 2020 TDRA NE2 Champion

December 04, 2023, 08:42 PM

BJs Wild Ride

I have a cam that’s way too big for the application. So I’ll probably just run that one, lol. I’ll put this one back in the shelf so I can debate it for another project in 10 years.

December 06, 2023, 11:25 AM

BP758

I would think it cut into the hardening/ nitride so yeah it would not survive..

California Screaming!
Raceless in California!

December 07, 2023, 03:46 PM

JPosey

Bullet just reground my sbc cam for 200.00. This could a good option for your application.