DragRaceResults.Com    Bracket Talk    Bracket Talk Forum  Hop To Forum Categories  Tech Talk - by Abruzzi    Mark Williams spool
Go
New
Find
Notify
Tools
Reply
  
Mark Williams spool
 Login/Join
 
DRR Elite
Picture of adv ET 266
posted
What does the -E suffix on my spool stand for?
mark williams Ent 9” Spool 53148-E



2005 2000lb 4 link dragster
home brew 582 BBC Dart 355
1.058
2.98
4.629@149
6.094
7.310@185

 
Posts: 12175 | Location: 33463 | Registered: February 04, 2004Reply With QuoteReport This Post
DRR Top Comp
posted Hide Post
You had me curious Paulie, I called Mark Williams today and the suffix is the revision number. The one on my spool is -B and so it is an earlier version. He said sometimes they change a radius or even change the machine it was manufactured on and so it would get a later revision number. He did say that they should interchange, no problem.


Clowns to the left of me, Jokers to the right. Here I am.......
 
Posts: 5334 | Location: stuck in the middle with you! | Registered: March 11, 2002Reply With QuoteReport This Post
DRR Elite
Picture of adv ET 266
posted Hide Post
Thanks Vern.

It’s on eBay, (if anyone needs a 9” race spool at what I think is a fair price, considering it includes both bearings.
https://www.ebay.com/itm/402657396202



2005 2000lb 4 link dragster
home brew 582 BBC Dart 355
1.058
2.98
4.629@149
6.094
7.310@185

 
Posts: 12175 | Location: 33463 | Registered: February 04, 2004Reply With QuoteReport This Post
DRR Sportsman
Picture of FootbrakeJim
posted Hide Post
Paul, for a minute I thought maybe you were getting back in the game! Smile


Dan "Jim" Moore
Much too young to feel this damn old!!
 
Posts: 1102 | Location: Farmersville, TX  | Registered: December 05, 2002Reply With QuoteReport This Post
DRR Elite
Picture of adv ET 266
posted Hide Post
Thanks for the thought, Jim. I’m very happy with my new passion, cycling including volunteer refurbishing kids bikes.



2005 2000lb 4 link dragster
home brew 582 BBC Dart 355
1.058
2.98
4.629@149
6.094
7.310@185

 
Posts: 12175 | Location: 33463 | Registered: February 04, 2004Reply With QuoteReport This Post
DRR Sportsman
posted Hide Post
will this work with Moser axles?
 
Posts: 618 | Location: nw ohio | Registered: November 20, 2001Reply With QuoteReport This Post
DRR Elite
Picture of adv ET 266
posted Hide Post
quote:
Originally posted by HR3377:
will this work with Moser axles?

I don’t know. Sorry



2005 2000lb 4 link dragster
home brew 582 BBC Dart 355
1.058
2.98
4.629@149
6.094
7.310@185

 
Posts: 12175 | Location: 33463 | Registered: February 04, 2004Reply With QuoteReport This Post



DRR Sportsman
Picture of Bad News
posted Hide Post
quote:
Originally posted by adv ET 266:
Thanks for the thought, Jim. I’m very happy with my new passion, cycling including volunteer refurbishing kids bikes.

No more RV ing?
 
Posts: 868 | Location: ft laud | Registered: September 02, 2004Reply With QuoteReport This Post
DRR Sportsman
Picture of Bad News
posted Hide Post
quote:
Originally posted by HR3377:
will this work with Moser axles?

call them to be sure, but mw has a different "pressure angle" on their splines
 
Posts: 868 | Location: ft laud | Registered: September 02, 2004Reply With QuoteReport This Post
DRR Top Comp
posted Hide Post
If it were 40 spline it would work with Moser but pretty sure the 35 spline MW does have a different pressure angle.


Clowns to the left of me, Jokers to the right. Here I am.......
 
Posts: 5334 | Location: stuck in the middle with you! | Registered: March 11, 2002Reply With QuoteReport This Post
  Powered by Social Strata  
 

DragRaceResults.Com    Bracket Talk    Bracket Talk Forum  Hop To Forum Categories  Tech Talk - by Abruzzi    Mark Williams spool

© DragRaceResults.com 2024