186-187 as of now. Got a lot of testing and parts swapping to get done before the first divisional Memorial Day weekend.
April 19, 2021, 08:14 AM
Mike Rietow
quote:
Originally posted by 1320racer:
New engine, break in oil , assembly lube, black moly paste.
Wrong, none of that makes the oil black.
Soot.
Ed, you're clueless. That's why you buy crate engines.
However many there are of these clone engines. run the same as yours.
You got a clone crate engine big whoopy shyt.
I'd build my own engine and out run your clone easy.
April 19, 2021, 08:25 AM
1320racer
It’s you that is clueless. Again, talk about what you know, not what you think you know. You can’t hang with me no mind engine builders of Scott’s caliber.
You ain’t got shyt that YOU BUILT that can run with my Firebird no mind my dragster.
April 19, 2021, 08:31 AM
Mike Rietow
I'd build own to out run you easily, it wouldn't have anything to do with Scotty Duggins, it would have to do with you. Clueless.
Now go change your oil before destroying a perfectly good piece.
April 19, 2021, 08:39 AM
1320racer
Fucing clueless idiot.
You ain’t got shyt, ain’t built shyt and ain’t done shyt worth talking about!
April 19, 2021, 08:45 AM
Mike Rietow
quote:
Originally posted by 1320racer: Fucing clueless idiot.
You ain’t got shyt, ain’t built shyt and ain’t done shyt worth talking about!
You're doing shyt any clone will do. You've admitted you're monkey see monkey do.
You're a clone. You're not even the best in you're neighborhood. So you run off and run NHRA, where you claim to be one of the best.
What does that say about NHRA? when you're not even the best in your own neighborhood.
On the other hand, I am the best in my neighborhood. And do shyt nobody has ever done before, on a 10" tire street car, with my own two hands.
This message has been edited. Last edited by: Mike Rietow,
April 19, 2021, 09:02 AM
Mike Rietow
You put food on other peoples tables, as you pretend to be doing something authentic.
You're a good and clueless slave.
A clone.
April 19, 2021, 09:48 AM
Mike Rietow
April 19, 2021, 11:42 AM
SS427IMP
quote:
Originally posted by 1320racer: Fucing clueless idiot.
You ain’t got shyt, ain’t built shyt and ain’t done shyt worth talking about!
1320 gets it. This site is much easier to handle since I put know-it-all Rietow on ignore. Maybe you should try it.
Ed, is a monkey see monkey do programmed automaton.
Read Ed.
Ed's great work is abomination and sadistic behavior.
April 19, 2021, 01:26 PM
329L
Ed, Nice Lap! Id say that thing is dialed in!
Jeremiah Hall
April 19, 2021, 01:36 PM
1320racer
Thanks, It is! Very happy with the out of the box results this weekend, both performance and consistency. Only ran three 1/4 mile passes over 2 days, 1 on Saturday and 2 on Sunday and all three were 6.97 and Saturday was a very different day than Sunday.
April 19, 2021, 02:26 PM
sc3171
4.500 @ 152mph with my steel block PAR 615 Elite 20 this weekend in 957' DA. Probably a solid tenth quicker than my PAR 598 sr20, so those guys have made some big improvements with these combinations over the last few years.
Looking to try a few different converters.
quote:
Originally posted by sc3171: Going to find out in about a month...
PAR 615 short deck (steel block) Elite 20 heads Edelbrock 2895 intake 870ish 55mm cam 16.5:1 compression 2.400" APD Max Speed - X14 fuel
I just purchased an FTI 93b converter to put behind it. Scott thought it would be .04 slower than what he normally sells with it but that it would be better on the stop. This will be going in a 2019 Racecraft car with the new Hoosier C1550 tires, and should weigh in right at 2000 lbs.
April 19, 2021, 03:00 PM
TOP38
quote:
Originally posted by SS427IMP:
quote:
Originally posted by 1320racer: Fucing clueless idiot.
You ain’t got shyt, ain’t built shyt and ain’t done shyt worth talking about!
1320 gets it. This site is much easier to handle since I put know-it-all Rietow on ignore. Maybe you should try it.
It’s you that is clueless. Again, talk about what you know, not what you think you know. You can’t hang with me no mind engine builders of Scott’s caliber.
Fucing clueless idiot.
This message has been edited. Last edited by: Mike Rietow, 
