Need the Correct Small base circle camshaft!

415 sbc with decked SHP block, eagle rotating assembly with JE 5.6cc dome pistons, AFR 220 #1110 aluminum heads, 1.6 roller rockers, Victor Jr intake with 1" spacer, 950 QF methonal carburetor & 1 7/8 headers.

Going into a 3200 pound with driver 1/8th mile ladder bar bracket car with 4.56 gear, 31x14x15 slick, Powerglide with a 55-5800 FTI converter.
Launching at 3800 & shifting at 6800.

I would call Bullet, they really have been very helpful. They asked a bunch of questions, intended use, weight, gear, trans, stall, what type and ratio rockers and many more and they got me a really good cam. I now buy most all of my cams from them except the SBC SB-2 cams as they do not have the cam cores I needed for that particular cam.

Another large big name company I called they asked me "Big block or Small block? Dirt or Drag? Here is cam you need." They did not know or care if I was entry level bracket racing or comp eliminator all out class racing. Hard pass.

Another large name cam company will NEVER answer phone.

Cams and Converters on our race cars is critical and in my opinion Bullet cams and Hughes converters are top of the line. They ask a lot of questions and are able to get you the one that best fits for needs.

I've been using Custom Cams for many years.
Tommy Kirk is very knowledgeable and thorough, I have probably bought at least a dozen solid rollers from him and never had a problem with his design and work. Give him a call and discuss your build. 662 534-4881

As racer DLR posted above, I also use Custom Cams. DLR posted the number in his comment. They work great, and as a bonus, they crackle at idle, which lets you know it means business.