Bracket Talk
Dry Sump on a Dart Big M

This topic can be found at:
https://drr.infopop.cc/eve/forums/a/tpc/f/80760912/m/5527025596

February 10, 2021, 03:22 PM
Buck2248
Dry Sump on a Dart Big M
OK, I am getting ready to install a dry sump system on my 615 with a dart big M block. Question I have is do I just need to remove the old oil pump and install a block off plate where pump mounts on main cap? I couldnt find any info looking around online. Thanks


Mike Buchwald


February 10, 2021, 03:38 PM
TD3550
Here you go... You putting a primer on it too?

https://www.jegs.com/i/Moroso/710/23790/10002/-1
February 10, 2021, 03:48 PM
Buck2248
I bought one of those alreadything that was all I would have to do. Good deal. And I will pull belt and use my drill like I do on my dragster dry sump


Mike Buchwald


February 11, 2021, 05:50 AM
Bad News
Tap the hole in the cap for a .15 1/4 npt plug. done.
February 13, 2021, 10:43 AM
Buck2248
This is a running engine so I will use the cap its not feasible to tap it right now. Thanks guys


Mike Buchwald