quote:

Originally posted by Andy5602:
if its a new build and a stock case the port in the back of the case must be drilled or enlarged to 1/4 if I remember right. had one tranny years ago that we pulled apart 4 times before we reread the directions! LOL

diceman ain't play'n stock case bro. What's up with your head gasket, you prep em spray sealant yet, fixed?

Turns out to be wrong valve body gaskets.

quote:

Originally posted by diceman1530:
Turns out to be wrong valve body gaskets.

Low or no pressure in reverse? You check it yet?

Another reason to get everything lapped flat and not use vb gaskets.


Hutch

quote:

Originally posted by Hutch:
Another reason to get everything lapped flat and not use vb gaskets.


Hutch

I kinda took Cashflows gasket suggestion with a grain of salt, been a while since I've seen a gasket, couldn't imagine diceman brand new Ray Miller dragster and all with a valve body gasket.

Wasn't this transmission working for a bit diceman, or did I misunderstand that part?

Who's VB is it?

I bought a lot of Godley VB's over the years never a gasket performed excellent.

Gasket kinda rare these days I think.

This wasn’t the dragster trans, it’s in a S10 we are putting together for my son. Just need a windshield installed and were ready to test.
Thanks everyone!!

I learned a valuable lesson years ago. Everyone knows something that you don't. Everyone knows a faster, better or easier way of doing something whether it concerns a race car or a kitchen recipe. I'm older than dirt and I never stop learning. Especially about ways to lose in drag racing. LOL

Have a great day everyone!!

quote:

Originally posted by Cashflow:
I learned a valuable lesson years ago. Everyone knows something that you don't. Everyone knows a faster, better or easier way of doing something whether it concerns a race car or a kitchen recipe. I'm older than dirt and I never stop learning. Especially about ways to lose in drag racing. LOL

Have a great day everyone!!

Same here.

All bets are off when the socialist / communist institution rigs the game too big to fail.

This message has been edited. Last edited by: Mike Rietow,

quote:

Originally posted by Mike Rietow:

quote:

Originally posted by Cashflow:
I learned a valuable lesson years ago. Everyone knows something that you don't. Everyone knows a faster, better or easier way of doing something whether it concerns a race car or a kitchen recipe. I'm older than dirt and I never stop learning. Especially about ways to lose in drag racing. LOL

Have a great day everyone!!

Same here.

All bets are off when the socialist / communist institution rigs the game too big to fail.

Surely I'm not the only person here tired of seeing this same picture over and over, especially with no relevance.....

quote:

Originally posted by Jonesz:

quote:

Originally posted by Mike Rietow:

quote:

Originally posted by Cashflow:
I learned a valuable lesson years ago. Everyone knows something that you don't. Everyone knows a faster, better or easier way of doing something whether it concerns a race car or a kitchen recipe. I'm older than dirt and I never stop learning. Especially about ways to lose in drag racing. LOL

Have a great day everyone!!

Same here.

All bets are off when the socialist / communist institution rigs the game too big to fail.

Surely I'm not the only person here tired of seeing this same picture over and over, especially with no relevance.....

To anger a liberal, tell him the Truth.

It's all about getting to know one another.

That's what this is.

What makes each of us tick.

This message has been edited. Last edited by: Mike Rietow,