DragRaceResults.Com    Bracket Talk    Bracket Talk Forum  Hop To Forum Categories  Tech Talk - by Abruzzi    Restrictor Plate Size?
Go
New
Find
Notify
Tools
Reply
  
Restrictor Plate Size?
 Login/Join
 
DRR Sportsman
Picture of Quick Dawg
posted
Race at altitude – 2700 to 4800 ft – Mild 555 with a 1050 carb – running high 8.3 to 8.4 – motor turns 7400 in the lights. Would love to slow it down to 9 sec to run Pro. Any idea what size hole I should start with on a restrictor plate?
 
Posts: 166 | Location: Salt Lake City | Registered: January 16, 2012Reply With QuoteReport This Post
DRR Sportsman
posted Hide Post
Have you thought about a high gear brake? It will kill .5-.6 with minimal mph loss and probably give you a better spot on the tree


Denis LeBlanc

 
Posts: 508 | Location: Manchester, NH | Registered: February 03, 2006Reply With QuoteReport This Post
DRR Sportsman
Picture of Quick Dawg
posted Hide Post
I did think about that and ask my trans guy. He said it would be very hard on the trans. Any opinions on that?
 
Posts: 166 | Location: Salt Lake City | Registered: January 16, 2012Reply With QuoteReport This Post
DRR Sportsman
posted Hide Post
quote:
Originally posted by Quick Dawg:
I did think about that and ask my trans guy. He said it would be very hard on the trans. Any opinions on that?


We started running high gear all the time on both cars at the beginning of the season. One is a 2800lb door car going 9.6-7 and 10.1x in high and my dragster goes 7.50s and 8.0s in high. I think the converter takes a lot more of a beating than the actual trans does. I don't think my wife has seen over 200 degrees for the trans temp yet. My dragster on race in July I staged for the first of two TT at 124 deg and staged in the 7th round at 164 degrees. I modified two leaf blowers with pvc pipe to blow directly on the converter and trans pan.


Denis LeBlanc

 
Posts: 508 | Location: Manchester, NH | Registered: February 03, 2006Reply With QuoteReport This Post
DRR S/Pro
Picture of CURTIS REED
posted Hide Post
Been running high gear all year. 5.70s in low 6.0s in high. 2000lb roadster. I’ve done it in years past also. I bought one of the larger carpet dryer type fans that has worked well. Has never hurt my trans but it does take you a while to get used to the way it lays on the converter. The extra MPH for the slower ET is nice. People will also make mistakes against you thinking they you won’t get to them because you move so late on them.

Still managing the heat is the biggest deal.

Curtis

This message has been edited. Last edited by: CURTIS REED,



____________________________
2017 and 2018 Osage Casinos Tulsa Raceway Park No-Box Champion

2018 Div4 Goodguys Hammer award winner
 
Posts: 3152 | Location: KIEFER, OK. | Registered: August 17, 2007Reply With QuoteReport This Post
DRR Sportsman
Picture of Quick Dawg
posted Hide Post
Thanks for all the input everyone!!!!!!!!!!
 
Posts: 166 | Location: Salt Lake City | Registered: January 16, 2012Reply With QuoteReport This Post
DRR Sportsman
posted Hide Post
just curious, is there a converter for high gear only applications? Would it make a difference?
 
Posts: 329 | Location: observing the mayhem | Registered: December 22, 2014Reply With QuoteReport This Post



DRR Sportsman
posted Hide Post
quote:
Originally posted by Tim Mitchell:
just curious, is there a converter for high gear only applications? Would it make a difference?


Our door car has the same converter it had when we left in first it stalls around 300 higher. I ordered a new BTE converter at the same time I installed the high gear brake. Chance set me up with a 9" that was specd for low gear stall of 6400 and high gear stall of 6800. It ended up being 6600 and 6800 and has been deadly both ways.


Denis LeBlanc

 
Posts: 508 | Location: Manchester, NH | Registered: February 03, 2006Reply With QuoteReport This Post
  Powered by Social Strata  
 

DragRaceResults.Com    Bracket Talk    Bracket Talk Forum  Hop To Forum Categories  Tech Talk - by Abruzzi    Restrictor Plate Size?

© DragRaceResults.com 2024