September 30, 2018, 04:09 PM
T/D6591Tunnel ram spacer to add plenum volume
Any one know who makes these Teflon spacers to add plenum volume to a tunnel ram? Looking for a 3/8 and 1/2 spacer for a HRE manifold for a customer.
September 30, 2018, 08:48 PM
Jeff Gillettetap plastics , a band saw and a couple hours of your time
been there
September 30, 2018, 08:54 PM
T/D6591So Jeff what you are saying is that you will have Barry get right on that for me? How about some longer brackets to bolt onto the carb stud that the throttle linkage will pivot off of,where do i find those?
October 01, 2018, 09:48 AM
Jeff GilletteBolt the bracket to the manifold
I can send you a pict
Kinsler has all the parts
October 01, 2018, 12:23 PM
Al AlguireWe made our own...Hopefully you got the brackets coming.
October 09, 2018, 08:23 AM
PascalMcMaster Carr or Grainger sells the spacer in different plastic/nylon. Make your template and cut yourself.
October 09, 2018, 08:37 PM
Paul S/QI cut ours out on the mill... lotsa debris but very easy and fast ....