DragRaceResults.Com    Bracket Talk    Bracket Talk Forum  Hop To Forum Categories  Tech Talk - by Abruzzi    pressure in trans at idle
Page 1 2 
Go
New
Find
Notify
Tools
Reply
  
pressure in trans at idle
 Login/Join
 
DRR Top Comp
Picture of wideopen231
posted Hide Post
Maybe not gasket after all. Measuring cover and depth in case.Cover is .010 deeper step than case. If running gasket it will dang sure have crush.only way to hold gasket will be small dab sealer or just set in place and then bolt cover on.




America home of free. Brought to you by 2nd amendment.
 
Posts: 4521 | Location: Greensboro NC | Registered: May 24, 2011Reply With QuoteReport This Post
DRR Top Comp
Picture of wideopen231
posted Hide Post
Cover will not seat with gasket,so guessing machined to seal w/o.

Greg said they see yoke push out on dyno,so guess getting excited over nothing. Well except the big cost piece of build.Engine don't count already had those.Ask my wife see has been told that lots.LOL




America home of free. Brought to you by 2nd amendment.
 
Posts: 4521 | Location: Greensboro NC | Registered: May 24, 2011Reply With QuoteReport This Post
  Powered by Social Strata Page 1 2  
 

DragRaceResults.Com    Bracket Talk    Bracket Talk Forum  Hop To Forum Categories  Tech Talk - by Abruzzi    pressure in trans at idle

© DragRaceResults.com 2024