DragRaceResults.Com    Bracket Talk    Bracket Talk Forum  Hop To Forum Categories  Tech Talk - by Abruzzi    Glide bellhousing?
Go
New
Find
Notify
Tools
Reply
  
Glide bellhousing?
 Login/Join
 
DRR Top Comp
posted
Has anyone ever gotten grief from tech when drilling and tapping the stock bell housing to hold small clamps or brackets? I know at one time I had heard you couldn't bore those 2 large (3"-4") cooling h0les like the early air cooled glides had...


.
Dave



F J B

 
Posts: 4480 | Location: Earth | Registered: February 08, 2006Reply With QuoteReport This Post
DRR Pro
Picture of 67TSCHEVY2
posted Hide Post
If it is not a SFI cert case it should not matter
 
Posts: 1245 | Location: middle georgia | Registered: July 20, 2003Reply With QuoteReport This Post
DRR S/Pro
posted Hide Post
If it's a stock glide housing 67TSCHEVY2 is correct it doesn't matter BUT if it's a SFI Certified housing I've been told you can't drill h0les for lift handles or additional cooling. You might call Reid Monday morning: (925) 935-3025 and ask them.

Bob
 
Posts: 3098 | Location: Lakeside, Ca | Registered: February 15, 2003Reply With QuoteReport This Post
  Powered by Social Strata  
 

DragRaceResults.Com    Bracket Talk    Bracket Talk Forum  Hop To Forum Categories  Tech Talk - by Abruzzi    Glide bellhousing?

© DragRaceResults.com 2024