Go
New
Find
Notify
Tools
Reply
  
Dzus Fasteners
 Login/Join
 
DRR Trophy
posted
Does anyone make a 1/4 diameter dzus with 5/8 to 3/4 of an inch reach?
 
Posts: 51 | Location: Kentucky | Registered: February 26, 2011Reply With QuoteReport This Post
DRR S/Pro
Picture of Big Steve
posted Hide Post
Check specialty fasteners. They are a sponsor here

https://www.specialty-fastener...ry&utm_campaign=Link
 
Posts: 2533 | Location: Moving back to the door side | Registered: April 30, 2010Reply With QuoteReport This Post
DRR Trophy
posted Hide Post
If you can find any take a Dzus to a machine shop, tell them how long you want it, shouldn't cost a whole lot, I needed some #6 3/4 long, I was fortunate enough to have a machinist available to me he made them it like 15 minutes, yes that easy for him, and they worked great.
 
Posts: 18 | Location: PENNA. | Registered: September 18, 2007Reply With QuoteReport This Post
DRR S/Pro
Picture of CURTIS REED
posted Hide Post
quote:
Originally posted by QUARTERFISH:
If you can find any take a Dzus to a machine shop, tell them how long you want it, shouldn't cost a whole lot, I needed some #6 3/4 long, I was fortunate enough to have a machinist available to me he made them it like 15 minutes, yes that easy for him, and they worked great.


32 year machinist here and shop manager. Could you send that guy my way? I couldn't even set up for the different operations it takes to make them in 15 minutes, not to mention making chips and I'm pretty fast at what I do.

Curtis



____________________________
2017 and 2018 Osage Casinos Tulsa Raceway Park No-Box Champion

2018 Div4 Goodguys Hammer award winner
 
Posts: 3124 | Location: KIEFER, OK. | Registered: August 17, 2007Reply With QuoteReport This Post
DRR Pro
posted Hide Post
quote:
Originally posted by QUARTERFISH:
If you can find any take a Dzus to a machine shop, tell them how long you want it, shouldn't cost a whole lot, I needed some #6 3/4 long, I was fortunate enough to have a machinist available to me he made them it like 15 minutes, yes that easy for him, and they worked great.



i love the internet
 
Posts: 1629 | Location: UsA | Registered: October 30, 2004Reply With QuoteReport This Post
DRR Trophy
posted Hide Post
First off, I am not a machinist, nor do I claim to be, I watched our machinist make it, yeah it was longer than 15 minutes....but not much, after this weekend I will take one out a post a picture of it, and yeah pal I love the Internet too......
 
Posts: 18 | Location: PENNA. | Registered: September 18, 2007Reply With QuoteReport This Post
  Powered by Social Strata  
 


© DragRaceResults.com 2024