Who has run a SR20 engine with alky injection such asa terminator or toilet? I have been wanting to try it out but would like to hear the results of anyone doing it already.
Thanks Henry Jo
Posts: 1 | Location: KY | Registered: December 24, 2019
Originally posted by Newbie598ci: Who has run a SR20 engine with alky injection such asa terminator or toilet? I have been wanting to try it out but would like to hear the results of anyone doing it already.
Thanks Henry Jo
Enderle, Rons (by killer Rons), Hilborn. They all work.
Dave Koehler - Koehler Injection - http://www.koehlerinjection.com Fuel Injection - Nitrous Charger - Nitrous Master Software - Balancing 99% of fuel injection problems are electric.
Posts: 364 | Location: Urbana, IL 61802 | Registered: December 03, 2003
It will work and has worked. Don't expect to bolt it on and to pick up 2-4 tenths (1/4 mile) over gasoline like most of the smaller, less fancy cylinder headed engines do though. The larger engines with fancy cylinder heads designed around gasoline do not usually pick up like more "average" combos. Sometimes they pick up some sometimes they don't. Depends on many variables. But, if you are gonna do it then mechanical injection on alcohol will likely give you the best shot at gains compared to most carbs. As you probably already know there are other desirable traits of alcohol like running much cooler in the summer months.
ScottThis message has been edited. Last edited by: 358T,
Check the other thread i posted on about my 615 with 20's and the burned piston. Would be happy to chat about it as you won't find many people if any who have done it. Lots of BS info out there. Dave Kohler and Scott from Killer Rons have the right approach and i think they can help you through it but i've got some real world experience on a combo i just put together and would be happy to share. Direct Message me and we can swap numbers.
Posts: 431 | Location: Pride, La | Registered: April 18, 2006