Changing a few things up during the winter. Car currently has Autometer Stack dash with many sensors and 7AL2. I have a new Grid System that I will be adding and getting rid of 7AL2. What im trying to figure out is there a way to also add my Racepack system and use the sensors that I already currently have installed for the Stack Dash?

I’m sure GREG KELLY would have the answers you need. He’s also on this forum.

Yea you can put pretty much any sensor in to the Racepak loggers. Still need a V-net connector and most importantly you need to know the calibrations for the sensors. Auto Meter can give them to you and I can guess some. Can be a bit of trial and error.

You can share pressure info, can not share temp info.

I also have a Stack Dash Set up https://www.autometer.com/race...pm-pro-comp-pro.html

I sure would like to hook my Sportsman Logger up to the sensors that came with the Stack Dash and Grid. Simply because I am not a fan of the Stack Data Logging.

The pressure sensors are simple. 0 will be .5 volts and what every the sensor is rated for will be 4.5 volts.

Marc I sent you a PM with some questions. Id appreciate any help and insight you could provide. Thanks

quote:

Originally posted by Da Shoe:
I also have a Stack Dash Set up https://www.autometer.com/race...pm-pro-comp-pro.html

I sure would like to hook my Sportsman Logger up to the sensors that came with the Stack Dash and Grid. Simply because I am not a fan of the Stack Data Logging.

How many v-net sensors do you now have and what are the Stack pressures you want to add? As long as you have 4 open v-net ports it will only cost you $230 for a USM module to bring in the info from those sensors.

Based on what Marc said it should be easy.

quote:

Originally posted by Greg Kelley:

quote:

Originally posted by Da Shoe:
I also have a Stack Dash Set up https://www.autometer.com/race...pm-pro-comp-pro.html

I sure would like to hook my Sportsman Logger up to the sensors that came with the Stack Dash and Grid. Simply because I am not a fan of the Stack Data Logging.

How many v-net sensors do you now have and what are the Stack pressures you want to add? As long as you have 4 open v-net ports it will only cost you $230 for a USM module to bring in the info from those sensors.

Based on what Marc said it should be easy.

I currently only have the Racepak Sportsman System,sso the only sensors I have is what it comes with. Now the Stack System I have Fuel Pres, Temp, Driveshaft, 02, Oil, and Trans Temp.