Front dragster wheel

DRR Pro

posted

Who makes a wall mount for one…I know I’ve seen one can’t find it now…

Posts: 1275 | Location: USA | Registered: December 04, 2008

imakehp

DRR Top Comp

posted

https://www.amazon.com/Carrier...%2Caps%2C150&sr=8-15

.
Dave

F J B

Posts: 4560 | Location: Earth | Registered: February 08, 2006

Ignored post by imakehp posted

1320racer

DRR Elite

posted

https://pitpal.com/spin-on-spare-tire-mount/#/

Posts: 13522 | Location: NJ | Registered: August 20, 2000

Ignored post by 1320racer posted

DRR Pro

posted

Someone made a small one just for dragster fronts….I thought

Posts: 1275 | Location: USA | Registered: December 04, 2008

Ignored post by WHOMPWHOMP posted

1320racer

DRR Elite

posted

I believe the ones in Goldrush and T&D trailers are made in house

Posts: 13522 | Location: NJ | Registered: August 20, 2000

Ignored post by 1320racer posted

seabass

DRR S/Pro

posted

it would be real easy to make one...i have a set I picked up from James monroe, happen to stumble on them... if you can find a set of spindles from a wrecked car or something..... a small lathe and some alumninum would work as well

This message has been edited. Last edited by: seabass,

J.R. Baxter

""Fathom the hypocrisy of a Government that requires every citizen to prove they are insured ..but not everyone must prove they are a citizen."

2024 Miller
Rolla Competition Engines
ProCharger
Hoosier Tires
Abruzzi

Posts: 1552 | Location: Waxahachie | Registered: July 04, 2005

Ignored post by seabass posted

DRR Pro

posted

Thanks…. Got some inside info on what I was looking for…

Posts: 1275 | Location: USA | Registered: December 04, 2008

Ignored post by WHOMPWHOMP posted

DragRaceResults

DRR / Crew

posted

This guy makes a lot of stuff for the top fuel teams. I think this is what Whomp was looking for. Pretty slick piece.

SL...

www.dragraceresults.com

Posts: 2155 | Location: Gallatin, TN - U.S.A. | Registered: October 12, 2009

Ignored post by DragRaceResults posted

DRR Pro

posted

^^^^^This

Posts: 1275 | Location: USA | Registered: December 04, 2008

Ignored post by WHOMPWHOMP posted

MikeB4963

DRR Sportsman

posted

I bought spindles and made my own.

Posts: 235 | Location: Justin, TX | Registered: July 18, 2013

Ignored post by MikeB4963 posted

TORQIN

DRR Pro

posted

Kid crashed under cover...all of a sudden had two wall mounts (used spindles) for the trailer.

Posts: 1754 | Location: Houston, Tx. | Registered: November 27, 2008

Ignored post by TORQIN posted

M120

DRR Sportsman

posted

Chris, LoL & ☹️ @ the same time.
Happy belated birthday as well.

Looks like a nice product that CGE makes. Don't know the price but pretty easy to make with access to a lathe and some spare material.

Posts: 622 | Location: Atco, NJ | Registered: March 14, 2002

Ignored post by M120 posted