Bracket Talk
Brodix intake

This topic can be found at:
https://drr.infopop.cc/eve/forums/a/tpc/f/80760912/m/4577077996

December 24, 2022, 09:16 AM
DLR
Brodix intake
I'm trying to find an intake that's made for Brodix SBC -12 heads(15*). I'm looking for a HV1200 or HV1201 that's been fully ported. Thank you.
December 24, 2022, 09:25 AM
1320racer
I would think there are better choices
December 24, 2022, 10:25 AM
B KING
quote:
Originally posted by DLR:
I'm trying to find an intake that's made for Brodix SBC -12 heads(15*). I'm looking for a HV1200 or HV1201 that's been fully ported. Thank you.


I don't have one, but does it need to be ported?

We have Brodix SBC 18x SP heads & use the matching Brodix intake HV1800. They both work just fine for bracket racing! Wink

2BKING Big Grin


1980 Camaro
Taking the Best Working Small Tire Shyt Box & making it Greater Than Before!
3000 lbs.
Pump Gas 436
December 24, 2022, 11:54 AM
DLR
quote:
Originally posted by B KING:
quote:
Originally posted by DLR:
I'm trying to find an intake that's made for Brodix SBC -12 heads(15*). I'm looking for a HV1200 or HV1201 that's been fully ported. Thank you.


I don't have one, but does it need to be ported?



We have Brodix SBC 18x SP heads & use the matching Brodix intake HV1800. They both work just fine for bracket racing! Wink
2BKING Big Grin

The Brodix -12 head is unique intake angle face and location. The Brodix intake as cast requires a lot more than port matching.
December 24, 2022, 12:07 PM
B KING
quote:
Originally posted by DLR:
quote:
Originally posted by B KING:
quote:
Originally posted by DLR:
I'm trying to find an intake that's made for Brodix SBC -12 heads(15*). I'm looking for a HV1200 or HV1201 that's been fully ported. Thank you.


I don't have one, but does it need to be ported?



We have Brodix SBC 18x SP heads & use the matching Brodix intake HV1800. They both work just fine for bracket racing! Wink
2BKING Big Grin

The Brodix -12 head is unique intake angle face and location. The Brodix intake as cast requires a lot more than port matching.


I'm aware of the unique face angle, ours is the same. Our manifold was CnC port matched from Brodix or the Builder, don't know who did it. Anyway, the ports needed a good amount of hand porting into the runner from the port match that I accomplished.

Good luck on finding what you need!

2BKING Smile


1980 Camaro
Taking the Best Working Small Tire Shyt Box & making it Greater Than Before!
3000 lbs.
Pump Gas 436
December 24, 2022, 12:22 PM
vetman
DLR a company called Revtec in calif. web site says they have one new in stock 714-202-2568 good luck


The difference between ignorance and stupidity. Ignorance is lack of knowledge. Stupidity is the inability to learn. Don't be stupid