DRR Pro
| We were guessing line as when we opened bleeder the stuck one released and the other side is OK. Got two lines today. Gee, only 20 years old!! Thanks. Jok |
| Posts: 1237 | Location: Janesville, IA | Registered: December 21, 2004 |
IP
|
|
DRR Pro
| How wore are the pads.. |
| |
DRR Elite
| Big Steve...KNOWS |
| |
DRR Pro
| I had Aerospace Components brakes on my last car.....Have Mark Williams on current car....Not even in the same league......I do miss being able to drive up to Mark Williams for stuff when I needed it though, was nice to have them local... Mark Goulette Owner/Driver of the Livin' The Dream Racing dragster www.livinthedreamracing.com"Speed kills but it's better than going slow!" Authorized Amsoil Retailer |
| Posts: 1539 | Location: Back home in Alaska! | Registered: February 13, 2011 |
IP
|
|
DRR Top Comp
| Lamb FTW
Clowns to the left of me, Jokers to the right. Here I am.......
|
| Posts: 5334 | Location: stuck in the middle with you! | Registered: March 11, 2002 |
IP
|
|
DRR Elite
| drag car brakes..
#1 Lamb #1.5 Mark Williams #2 Strange #3 Moser #4 Wilwood #5 Aerospace |
| |
DRR Pro
| I’ve had strange,still got Mark Williams on one ride fixin to try out lambs on another but the best calipers I’ve used without question with a Mark Williams rotor is TBM.... |
| |
DRR S/Pro
| quote: Originally posted by 1320racer: drag car brakes..
#1 Lamb #1.5 Mark Williams #2 Strange #3 Moser #4 Wilwood #5 Aerospace
Ed, Lamb does make nice brakes, just have no idea why they use cast rotors! I have never seen a MW rotor break but have with Lamb's. IMO cast rotors have no place on a race car. |
| Posts: 2163 | Location: Tewksbury, MA,USA | Registered: November 03, 2000 |
IP
|
|
DRR Elite
| Cast rotors don't warp |
| |
DRR S/Pro
| quote: Originally posted by 1320racer: Cast rotors don't warp
Neither have my MW steel ones. More maintenance/checking with CI. I also Lamb does state limits with their CI stuff and many using them exceed those! |
| Posts: 2163 | Location: Tewksbury, MA,USA | Registered: November 03, 2000 |
IP
|
|
DRR Elite
| My MW rotors have but we use our brakes before the finishline |
| |
DRR Pro
| Appreciate the ideas. Looks like it was the left line. Replaced them both, probably going to rebuild if O-rings get here. Never had an issue with Strange brakes, this was a line failure (been on the dragster since we built it, 2001). Done master cylinder once and freshened calipers about 12 years ago just because...? Have a safe Holiday weekend and beyond. Jok |
| Posts: 1237 | Location: Janesville, IA | Registered: December 21, 2004 |
IP
|
|
DRR S/Pro
| quote: Originally posted by 1320racer: Cast rotors don't warp
Aren’t the rotors on your daily driver cast? I know mine are and they warp. |
| Posts: 2595 | Location: at the track | Registered: May 09, 2007 |
IP
|
|