Putting new coil packs on. Coils have male terminal just like a spark plug. Ideally I’d have 4x 10” wire and 4x 16” wires but I can live with 8x 16.

My biggest concern is EMI. I can’t get a resistor plug that’s cold enough and the non resistors make my data look horrible and might even be causing some misfires.

Looking at Taylor 79055 and I’ll cut to length but not sure if there is better options out there?

https://www.summitracing.com/parts/tay-79055

I’d like to have straight boots on the plugs and 135 boots on the coil end but couldn’t find that option.

I have some of these to try but havent yet, there suppose to be good for EMI

I think you need to look at bulk supplier parts. Roll or length of spiral wire, your 135 degree plug terminal ends and boots, some straight plug ends and coil boots, you can make them the perfect lengths you want.

FIRECORE

Solved my logger problems and can be made exactly like you want them made. If you happen to ruin one, you can call them up and have that one made from your original order.
Totally worth the money.


https://firecoreperformance.co...ngth-ignition-wires/

https://sparkplugwires.com/

Call Mark and speak to him.
He’s got you covered!

FIRECORE

Magnecor FTW

Autozone!!!!

quote:

Originally posted by Coloradoracer:
Autozone!!!!

That’s what’s on it now. Worked just fine with stock coils and resistor plugs. Not so good with non resistor racing plugs.

I tried to pull the trigger on magnecore 8.5s but kinda bummed they won’t take a phone order. Have to fill out a form which is mostly irrelevant to my combo.

^^^^ That’s weird. I would have sworn that I ordered mine over the phone.

I did to Cash

I know I did JR, cause I gave them all the measurements.

It was a little bit of a struggle but i did finally manage to get them to take my money. We’ll see what actually shows up. My confidence is not high so I have a box of MSD cut to fit sitting here waiting.