|
Go ![]() | New ![]() | Find ![]() | Notify ![]() | Tools ![]() | Reply ![]() | ![]() |
DRR Trophy |
Looking for replacement stainless 3/4" self-tapping trailer skin screws. Any source for about 200 of them? | ||
|
DRR S/Pro![]() |
Not sure what size they are but I would recommend you get the next larger size as the h ole is probably enlarged if yours fell out. #10 square drive #8 square drive Dave "It is usually futile to try to talk facts and analysis to people who are enjoying a sense of moral superiority in their ignorance." -Thomas Sowell | |||
|
DRR Sportsman |
Mcmaster-carr Most S/S screws and aluminum don't like each other. | |||
|
DRR Trophy |
When I first saw this thread yesterday I thought I'd dig in and see what was out there. I found the ones posted above but also noticed that the zinc plated version has a reduced drill tip and a "transition" taper to the thread size. I wonder if the zinc ones would hold better. I work in the trades and use a lot of K-lathe screws and prefer the pointy ones of the driller because they take too much material out. I'm probably not helping lol | |||
|
DRR Trophy |
I remember trailer place I bought my trailer from talked about getting replacement screws in like a oversized with out going from like #6 to #8 | |||
|
DRR Trophy |
Just googled trailer skin screws and summit has them in kits of 1000 | |||
|
DRR Sportsman![]() |
a guy on ebay has #10 to #11 Screws White https://www.ebay.com/itm/16540...5:g:FasAAOSwQXpiRLLv zinc plated https://www.ebay.com/itm/16579...a:g:WjkAAOSwiURa06Qt Without data, you’re just another guy with an opinion. | |||
|
Powered by Social Strata |
![]() | Please Wait. Your request is being processed... |
|