August 27, 2020, 11:56 AM
Mike Rietow
quote:Originally posted by Mike Rietow:
Those are still the steps. Look for those options.
On a phone it's a condensed version.
quote:Originally posted by Dotsonfirearms:quote:Originally posted by Mike Rietow:
Those are still the steps. Look for those options.
On a phone it's a condensed version.
Once I get it the pictures uploaded to IMGUR how do I get them on here
quote:Originally posted by Mike Rietow:quote:Originally posted by Dotsonfirearms:quote:Originally posted by Mike Rietow:
Those are still the steps. Look for those options.
On a phone it's a condensed version.
Once I get it the pictures uploaded to IMGUR how do I get them on here
Hover your finger, the share option will show, choose the BBC (forums) option.
quote:Originally posted by Dotsonfirearms:quote:Originally posted by Mike Rietow:quote:Originally posted by Dotsonfirearms:quote:Originally posted by Mike Rietow:
Those are still the steps. Look for those options.
On a phone it's a condensed version.
Once I get it the pictures uploaded to IMGUR how do I get them on here
Hover your finger, the share option will show, choose the BBC (forums) option.
Well for some reason the BBC forums are not an option. When I get home tonight I will get on my computer and try to figure it out
quote:Originally posted by Dotsonfirearms:
I am building a 434 using an Iron Eagle block with a Moroso 21019 oil pan. The problem is the starter is hitting the oil pan. Not the body or solenoid but the mounting plate is hitting the kick out. I can get the outside bolt in but not the inside bolt. The starter needs to come back towards the front of the engine a full bolt hole but it hits the pan. I have tried a power master xs and the Mezeire TS500. If anyone has ran across this problem let me know what the solution was please.
quote:Originally posted by 1leg:quote:Originally posted by Dotsonfirearms:
I am building a 434 using an Iron Eagle block with a Moroso 21019 oil pan. The problem is the starter is hitting the oil pan. Not the body or solenoid but the mounting plate is hitting the kick out. I can get the outside bolt in but not the inside bolt. The starter needs to come back towards the front of the engine a full bolt hole but it hits the pan. I have tried a power master xs and the Mezeire TS500. If anyone has ran across this problem let me know what the solution was please.
It is very common that the nose block gets trimmed a bit to fit the oil pans. The TS400 starter will give you a little more room but you would likely still have a issue with the noseblock.
quote:Originally posted by Mike Rietow:
Looks good. Nothing wrong with that.
quote:Originally posted by Mike Rietow:
You'll like the Brodix T1 233. What's the combo? Cam specs, stroke, compression? etc etc?
quote:
quote:Originally posted by 1leg:quote:
Nice work, I'll tell you most do not do that nice of a job. Most get the grinder treatment!