Looking for small block build info

July 11, 2018, 10:14 AM

SpeierRacingHeads

quote:
Originally posted by markemark:
^^^^^^^^^^
Chad, there is no doubt that you continue to put together some very strong sbc packages as you have listed.
Would you share what block manufacture these were installed into ????

Stock block

July 11, 2018, 10:16 AM

SpeierRacingHeads

Another 380cid Stock Block build

Stock block 4.155x3.50
SRH v2.35PF heads (205cc)
SRH Holley 300-110 ported/burr finished
Whitener 4150 carb
2.08/1.600 SRH Severe Duty valves
K-Motion K1650 springs
LGM 1.70 rockers .300 offset
Trend double taper pushrods 8.100 long
Erson 262/268 106 LSA 101 ICL
.690/.660 retainer lift
Crower lifters
Moroso oil pump
Stef's oil pan
Scat LW Crankshaft
Scat LW Rods 6.000
Mahle Pistons 13.5-1 w/gas ports
1.2/1.2/2mm rings
Jesel belt drive
Jesel front distributor
Moroso wires
Innovators West damper
Starr vacuum pump
Whitener billet 4150
piston .010 in the hole
.0030-.0032 main clearance KING bearings
.0028-.0030 rod clearance KING bearings
.024/.026 ring gap

545@5400
677@7000

July 11, 2018, 02:50 PM

369dragster

quote:
Originally posted by B.C.Malibu:
quote:
Originally posted by 369dragster:
66 Nova 355cid Dart 220 heads ported with super victor to match. Roller cam 650-650,750 carb. Best ET is 9.72 @ 136 @ 2850lbs. It's really nothing special. Driver does't wan't to get license so we slow it down to 10.0's

What rear tire size and gear ratio?

31 X 14 and a 5.13 rear gear with a turbo 400

July 13, 2018, 11:41 AM

Curly1

I would build a decent 406 or a 434 and run a mild cam with 1.5 rockers. Get a cam that would work with 1.7?rockers if (when) you need (want) more.
A good 406 like that would last for many years and you could step on it more when time comes.

https://postimg.cc/gallery/np3zpruo/
"Dunning-Kruger Effect"
-a type of Cognitive bias where people with little expertise or ability assume they have superior expertise or ability. This overestimation occurs as a result of the fact that they do not have enough knowledge to know they don't have enough knowledge.

Before you argue with someone ask yourself, "Is this person mentally mature enough to grasp the concept of a different perspective?" If not there is no point to argue.

4X NE2 CHAMPION. 2020 TDRA NE2 Champion