Bracket Talk
Throttle cable mounting plate/bracket
June 01, 2021, 12:54 PM
SCDIV1Throttle cable mounting plate/bracket
Who can show me a throttle cable mounting plate for a dragster using an inline stop or SLE
I have one but looking for something better/sturdier
The mount has to move back quite a way for the stop
I have a chromed bracket that sits on one side of the carb and has an extension piece to mount the cable.
I don't like it....
I don't need a scoop tray mount style as my scoop is held on a different way
Just a better cable mount using an inline stop.....
I have a Dedenbaer dual acting stop I've used for S/C and as an SLE for bracket racing....
Looking for a better mounting arrangement.....
June 01, 2021, 03:09 PM
CashflowThe Terminator throttle controller extension works great. I used it for a long time. Bolts right on the Dominator pattern.
http://www.killerrons.com/mountinghardware.cfm
Clowns to the left of me, Jokers to the right. Here I am.......
June 01, 2021, 05:36 PM
Top355xI have the one a guy on racing junk sells e also sells dragster windshields also very sturdy and reasonably priced
June 01, 2021, 05:37 PM
Top355xLook in the dragster section on racing junk
June 01, 2021, 05:44 PM
Top355xI just looked I dot see his ad for the trays anymore but his email is Brucevanstraten@gmail.com
June 01, 2021, 06:30 PM
SCDIV1I have used inline stops with Terminators and carbs.
Modified what I had and added a support down to the back of the cylinder head and it was rock sold. That was on my old car.
I’ve run plate stops, in-line stops, a Terminator and carbs on my current car.
At one time I had both a plate and an in-line on at the same time.
I just wanted to go back to having multiple options to use either.
I’ll try messaging that person, thanks.
The Ron’s unit looks better than what I have now.
Another good option. Thanks
June 01, 2021, 06:44 PM
SP 124XI use the jegs return spring/throttle cable bracket and their SLE/Throttle stop extension.
Denis LeBlanc
June 01, 2021, 07:18 PM
CHampshireNot sure if it will work for you, but Lokar makes a nice setup. Our cylinder is on the pedal, but I imagine the cylinder would work up at the carb
June 01, 2021, 10:01 PM
seabassI use a csr, not sure if they make them anymore or not, I bought a couple and saving them just incase
J.R. Baxter
""Fathom the hypocrisy of a Government that requires every citizen to prove they are insured ..but not everyone must prove they are a citizen."
2025 Miller
Rolla Competition Engines
ProCharger
Hoosier Tires
Abruzzi
June 03, 2021, 05:40 AM
Tony BarrettI use the Lokar set up. Scoop mount and they give you 2 different cable brackets. I have an in line stop and the plate is even drilled to mount the solenoid.
https://www.lokar.com/drag-racing-products.htmlJune 03, 2021, 06:55 AM
SCDIV1Thanks for all the replies
I sometimes want to change things up
Never liked running an under carb plate stop
BUT probably had better success with one vs an inline when running a carb
With all the big HP engines out there in S/C, trying to find a few MPH can't hurt
After thinking about it a while I'm staying with a plate for now
Fastest car I saw last weekend at MG Lucas before the rain went around 191 and that's nothing new really
As soon as my hunchback uncle straightens up I'll git me one of them there 1300 hp motors.....

NOPE.....