February 06, 2018, 06:16 PM
imakehpHeaders
I'm not the one with moobs AND lumpy headers....

.
.
Dave
F J B
February 06, 2018, 06:22 PM
1320raceryour the one that desires both.

February 06, 2018, 06:29 PM
imakehpquote:
Originally posted by 1320racer:
your the one that desires both.
uhhh.....no that's ok....you keep them tinker bell....

.
Dave
F J B
February 07, 2018, 02:58 AM
The Bozmanquote:
Originally posted by imakehp:
quote:
Originally posted by 1320racer:
your the one that desires both.
uhhh.....no that's ok....you keep them tinker bell....
I think that picture is the blobs on his welds. Ed, you have to admit, you always claim the best shtuff, the prettiest, all the bling and you posted something that if someone else posted you would have been all over them for it. just a little touch up and none of this would have happened (obviously if you didn't call everyone elses stuff junk when it isn't you wouldn't get the same response). you just saw exactly what you do to everyone else on this forum. Karma.
And please don't talk about me being a nobody or having junk or blah blah blah, because we have all been down that road and the championships and big money wins speak for themselves.
Keeping the Socialists and NEO-LIBERALS at bay with FACTS one post at a time !!!
Freedom isn't free !!! Thank a veteran, they will actually appreciate it.
February 07, 2018, 04:26 AM
1320racerwhat I see is a few pathetic jealous nobodies desperate to find any issue with my top shelf cars/equipment who can only find a "booger", a miniscule nothing on the underside of a pipe/flange, same nothing on my dynatech headers same nothing I've seen on just about every header.
You and they have FAILED yet again!

Haters gonna hate!
February 07, 2018, 05:24 AM
SP310GWhen you woke up this morning Ed, we're your moobs in your armpits?
February 07, 2018, 05:44 AM
bry-warMaybe Ed can get his new COPO Camaro specially equipped for moobs. I wonder how he's gonna get away with belittling his fellow factory stocker friends.
BW
February 07, 2018, 06:41 AM
VORTECPROquote:
Originally posted by 1320racer:
Thanks Mike and I'm sure they will, all the fab shop headers I have seen look good, I just don't buy into their claims.
Yea, me and Tom are the target of the jealous haters and another thing we have in common besides our good looks is both our wives are former models.
Ed.......the only modeling in your family is you modeling training bras for men over 50. Although I wouldn't call your headers junk, I would say its FAR from the quality my fabricators work would look like right down to the polished stainless steel.
February 07, 2018, 07:06 AM
Busted Knucklesquote:
Originally posted by 1320racer:
Ignore the haters comments.
You just can't. Proof of just who is the puppet at the end of the strings. Yank, yank.
A million friggin' views means $h!t when half of them are yours, Ed Kardashian.
Saggy man boobs. Too many trips to Dairy Queen to soothe the hurt feelings after another first round runner-up finish. I guess it really hurts when the guy that beat you with a wheelbarrow with a flat tire is there to celebrate, huh?
Yeah, I know...another nobody who aint' got shyt and ain't done shyt...but at least I ain't got saggy man boobs!!!
Organized people are just too lazy to look for their $h!t.
February 07, 2018, 07:18 AM
"The Bender"quote:
Originally posted by Busted Knuckles:
Yeah, I know...another nobody who aint' got shyt and ain't done shyt...but at least I ain't got saggy man boobs!!!
You forgot pathetic,
jealous nobody!

272" Spitzer
540 Chevy
The Blower Shop XR1
FTI XPM Series Converter
FTI Level 6 Powerglide
3.69@199
.916 60'
2017 Bradenton Heads Up Madness
Open Outlaw Champ
2018 PDRA T/D #5
2019 PDRA T/D #2
2020 Retired From T/D Competition....
2020 Bradenton NMCA Hemi Shootout Winner
2021 getting back into bracket racing with a Gen3 Hemi powered 87 Cutlass.
February 07, 2018, 07:27 AM
The Bozmanquote:
Originally posted by 1320racer:
what I see is a few pathetic jealous nobodies desperate to find any issue with my top shelf cars/equipment who can only find a "booger", a miniscule nothing on the underside of a pipe/flange, same nothing on my dynatech headers same nothing I've seen on just about every header.
You and they have FAILED yet again!

Haters gonna hate!
I haven't failed, unless you consider divisional championships, big money bracket racing wins, track championships are failures then that would explain why you think you aren't a failure. Since you think I am a nobody, how much of a nobody are you since you don't travel, haven't won anything, spend tons of money to still be a runner up early in the rounds. Since you said I was a nobody, you knew this was coming, I gave you an out and all you had to do was just try and let it be but NO, you are such a nobody and your biggest accomplishment is having someone else build you a trailer.
So before you say anything about anyone else being a nobody then answer the following PRIOR:
Tell everyone on here:
1. how many divisional races have you won
2. how many big money bracket races have you won, IE larger than $3k to win
3. how many Divisional Championships have you won
4. how many rounds have you gone at the biggest and best race in the world over the last 10 years, yes "little man" that would be the Million.
5. How many track championships have you won in foot-brake and electronics?
All the above DETERMINES your skill set and everyone else's measuring stick on what you actually know. Because if you can't even apply it yourself and make it work then why would anyone think it is anything more than BS
Offering First hand WINNING experience based on WINNING on track performance at RACETRACKS ALL OVER THE COUNTRY, not just CLAMIDIA RACEWAY (where some can't even make a 50 person bracket finals team)
These are the questions when you try to solidify who you are and how good of a driver and tuner you are, otherwise, you are a just a hot air pontificater.

Keeping the Socialists and NEO-LIBERALS at bay with FACTS one post at a time !!!
Freedom isn't free !!! Thank a veteran, they will actually appreciate it.
February 07, 2018, 07:45 AM
1320racerAGAIN, haters gonna hate.
Pathetic jealous internet forum NOBODIES, the majority of which ain't got shyt nor done shyt!!
February 07, 2018, 08:03 AM
Busted KnucklesYank...yank...yank...
"Hey, wannabe racer career test-n-tuners, just in time for racing season!!! Yank the strings and Howdy Doody comes to life, grab the ring and pull the string on his back and hear "clueless nobody that ain't got shyt and ain't done shyt". Priceless!!!
Get yours today! Complete with oversized head and saggy man boobs.
But wait, call in the next 15 minutes and you'll also get a scale model of his trailer, complete with Firechicken and Dragster that you can unload, drive for one pass, then load back up."
Organized people are just too lazy to look for their $h!t.
February 07, 2018, 08:10 AM
"The Bender"quote:
Originally posted by Busted Knuckles:
Yank...yank...yank...
"Hey, wannabe racer career test-n-tuners, just in time for racing season!!! Yank the strings and Howdy Doody comes to life, grab the ring and pull the string on his back and hear "clueless nobody that ain't got shyt and ain't done shyt". Priceless!!!
Get yours today! Complete with oversized head and saggy man boobs.
But wait, call in the next 15 minutes and you'll also get a scale model of his trailer, complete with Firechicken and Dragster that you can unload, drive for one pass, then load back up."

272" Spitzer
540 Chevy
The Blower Shop XR1
FTI XPM Series Converter
FTI Level 6 Powerglide
3.69@199
.916 60'
2017 Bradenton Heads Up Madness
Open Outlaw Champ
2018 PDRA T/D #5
2019 PDRA T/D #2
2020 Retired From T/D Competition....
2020 Bradenton NMCA Hemi Shootout Winner
2021 getting back into bracket racing with a Gen3 Hemi powered 87 Cutlass.
February 07, 2018, 08:11 AM
1320racermore

from the redneck "poor boy" nobody with NOTHING according to Tracy Dennis.
February 07, 2018, 08:13 AM
The Bozmanquote:
Originally posted by Busted Knuckles:
Yank...yank...yank...
"Hey, wannabe racer career test-n-tuners, just in time for racing season!!! Yank the strings and Howdy Doody comes to life, grab the ring and pull the string on his back and hear "clueless nobody that ain't got shyt and ain't done shyt". Priceless!!!
Get yours today! Complete with oversized head and saggy man boobs.
But wait, call in the next 15 minutes and you'll also get a scale model of his trailer, complete with Firechicken and Dragster that you can unload, drive for one pass, then load back up."
To quote Ed
" ^^^^ THIS ; BUSTED KNUCKLES KNOWS !!!"
I just pulled the string again, Yank. Now lets see how tight the choker collar is, LOLIt is so easy because he has nothing else to contribute to racing, this is his only racing fame !!!!

Keeping the Socialists and NEO-LIBERALS at bay with FACTS one post at a time !!!
Freedom isn't free !!! Thank a veteran, they will actually appreciate it.
February 07, 2018, 08:17 AM
1320raceryes, he knows about having NOTHING!
February 07, 2018, 08:21 AM
pauleyI'm waiting on the go to phrase.........."you suck"
but the "ain't got ch!t ain't done ch!t" is a good one to have in the back pocket.
ep-booger.....that's a funny word to me.
headers look pretty good to me. to get back to the OP
February 07, 2018, 08:24 AM
pauleymoobs is pretty witty as well
ep