Headers

February 21, 2018, 05:40 PM

T/D6591

Headers

quote:
Originally posted by TubeCarz:
I just got off the phone with a buddy of mine with the New Joyzee state police .
He told me they apprehended an incoherent fat man that must have been in a wrecked white firechicken on the side of the road for days .

He was covered in man chowder and feathers ,
s u kk i n g a race track corndog , while looking at the same three or for pictures of some POS hunk of junk and mumbling I aint got shyt , I aint done shyt ... I aint got shyt , I aint done shyt ...
If anyone knows this h o m o or want to claim him , he can be found at the Hobo-kin mental hospital . perv ward .

February 23, 2018, 05:29 AM

1320racer

17,000+ views on our way to 18,000 about just another set of mild steel coated headers! Spitting

More photos coming after this weekend.

Thanks again, to Greg Holman aka REF Unlimited in Kingman, AZ. and Gene Schaffer aka Central Connecticut Coatings.

If you have a need for either or both, give them a call, you won't be disappointed in the workmanship, quality, lead time or price.

quote:
Originally posted by J178RED:
A lot of buddies have used him, and everyone just raves about him. I think he is a real artists, seen some stuff that looks great and performs better than you can imagine. he is very good

quote:
Originally posted by "The Bender":
They do look good in the pictures.

quote:
Originally posted by Wooley:
Very nice

quote:
Originally posted by pauley:
headers look pretty good to me. they are nicer than most and for sure mine.

quote:
Originally posted by bbtommyd:
They made headers for my dragster last October. They are the best set I've owned. bar none.

quote:
Originally posted by jenavet:
those headers look great all cleaned up and coated!!

February 23, 2018, 05:59 AM

SP310G

quote:
Originally posted by T/D6591:
quote:
Originally posted by TubeCarz:
I just got off the phone with a buddy of mine with the New Joyzee state police .
He told me they apprehended an incoherent fat man that must have been in a wrecked white firechicken on the side of the road for days .

He was covered in man chowder and feathers ,
s u kk i n g a race track corndog , while looking at the same three or for pictures of some POS hunk of junk and mumbling I aint got shyt , I aint done shyt ... I aint got shyt , I aint done shyt ...
If anyone knows this h o m o or want to claim him , he can be found at the Hobo-kin mental hospital . perv ward .

That can't be 1Ed. When he gets meat like that near his mouth he usually slaps it on his face a couple times

February 23, 2018, 06:06 AM

1320racer

^^^says the jealous clueless p u s s y that ain't got shyt, ain't done shyt, contributes nothing to this forum, hides behind a screen name and couldn't buy a round at Numidia.

February 23, 2018, 08:19 AM

VORTECPRO

[QUOTE]Originally posted by 1320racer:
^^^says the jealous clueless p u s s y that ain't got shyt, ain't done shyt, contributes nothing to this forum, hides behind a screen name and couldn't buy a round at Numidia.[/QUO

28 th place LOL awwwwww

February 23, 2018, 08:30 AM

1320racer

^^^says the jealous, clueless, pathetic internet forum nobody, ebay engine builder who ain't got shyt nor done shyt EVER bracket racing who too contributes nothing to this forum.

yep competing in about half of the points races and you finished in what place last year loser? Answer...NOWHERE, you don't race no mind bracket race!

Now back to the custom headers built by Greg Holman aka REF Unlimited in Kingman, AZ. and Gene Schaffer aka Central Connecticut Coatings/ Worksmanship and quality work that is 2nd to none.

February 23, 2018, 08:40 AM

VORTECPRO

quote:
Originally posted by 1320racer:
^^^says the jealous, clueless, pathetic internet forum nobody, ebay engine builder who ain't got shyt nor done shyt EVER bracket racing who too contributes nothing to this forum.

yep competing in about half of the points races and you finished in what place last year loser? Answer...NOWHERE, you don't race no mind bracket race!

Now back to the custom headers built by Greg Holman aka REF Unlimited in Kingman, AZ. and Gene Schaffer aka Central Connecticut Coatings/ Worksmanship and quality work that is 2nd to none.

I either won or was in the final round every time I went out last year. And I'am not even a bracket racer.......28th place unbelieveable

February 23, 2018, 08:45 AM

1320racer

must be true, I read it on an internet forum posted by a pathetic, clueless, jealous, internet forum NOBODY that ain't got shyt nor done shyt bracket racing EVER!

proof or STFU LOSER!

February 23, 2018, 09:02 AM

VORTECPRO

quote:
Originally posted by 1320racer:
must be true, I read it on an internet forum posted by a pathetic, clueless, jealous, internet forum NOBODY that ain't got shyt nor done shyt bracket racing EVER!

proof or STFU LOSER!

I've already cashed the checks.....checks your never going to see from winning races. How long has it been? Bracket man 28th place LOL LOL LOL< awwwww

February 23, 2018, 09:06 AM

Rymo

(.)(.)

February 23, 2018, 09:08 AM

1320racer

no one is surprised, of course he can't post one time slip from a final last year.

Fucin Liar, Fucin LOSER!

February 23, 2018, 09:25 AM

jenavet

quote:
I either won or was in the final round every time I went out last year.

seriously bro??

February 23, 2018, 09:49 AM

"The Bender"

quote:
I either won or was in the final round every time I went out last year.

Hey, that's my line.........

272" Spitzer
540 Chevy
The Blower Shop XR1
FTI XPM Series Converter
FTI Level 6 Powerglide
3.69@199
.916 60'

2017 Bradenton Heads Up Madness
Open Outlaw Champ

2018 PDRA T/D #5
2019 PDRA T/D #2

2020 Retired From T/D Competition....

2020 Bradenton NMCA Hemi Shootout Winner

2021 getting back into bracket racing with a Gen3 Hemi powered 87 Cutlass.

February 23, 2018, 09:55 AM

jenavet

ya and I have a 10inch blower too

February 23, 2018, 11:49 AM

bry-war

Wong the Dyslexic sez....
Yea I too have blower 10in!

I was thinking....I know some of us keep a pretty good shade over the the belt buckle but I just bend over a bit to find it. What's a man with moobs do? Wouldn't they just move with your line of sight

Ed must keep a mirror in his pocket.

February 24, 2018, 06:58 AM

Busted Knuckles

Alright, Mr. Bracket Racing God Ed Kardashian...post your final round slips or pics in the winner's circle. You continue to say that pretty much everyone "ain't done shyt". Lets see yours. Yours, not your son's.

Pucking blowhard wannabe race winner. 28th place...I've never even set foot in *****in' Joisey and came in 3 places behind you.

Before I even post this, I'll predict the reply:
Jealous yada yada ain't got shyt yada yada.
ALONG WITH NO PROOF OF HIS OWN ACCOMPLISHMENTS.

Ed Kardashian...has a lot of nice shyt but ain't done shyt with it, gonna sell it and buy nicer shyt to continue his streak as first round runner-up.

YANK, YANK, YANK...

February 25, 2018, 12:29 PM

Mike Nitzsche

I wasn't going to post anything, but decided to anyway....lol. I didn't read through all the pages, but I can say Ed's headers are nice. Coming from a guy that builds a lot of headers, I can say that it takes talent to build a set of headers even copying another set. All the headers I have built were for bracket cars. Most of them are for racers that cannot buy shelf headers for they're chassis. My first thought when looking at the pics was "cool, those headers look like something I would have built"

chevy 2 headers by neetchracer, on Flickr

g body side exit by neetchracer, on Flickr

g body big tube by neetchracer, on Flickr

February 25, 2018, 01:45 PM

1320racer

Mike Nitzsche...KNOWS!

March 05, 2018, 06:19 AM

1320racer

March 05, 2018, 06:46 AM

"The Bender"

quote:
Originally posted by 1320racer:

NHRA mandated exhaust valve head containment device?