Page 1 2 
Go
New
Find
Notify
Tools
Reply
  
2021/2022
 Login/Join
 
DRR Elite
posted
Offseason upgrades. What is the plan for your car(s)?

Me...

Firebird
slicks
paint repairs
normal maintenance
-oil/fluid & filter changes
-brake pads and flush fluid

Dragster
fresh engine
new hoses/AN fittings
slicks
normal maintenance
-oil/fluid & filter changes
-brake pads and flush fluid
 
Posts: 13522 | Location: NJ | Registered: August 20, 2000Reply With QuoteReport This Post
DRR S/Pro
Picture of "The Bender"
posted Hide Post
Built another more "appropriate" bracket Gen3 Hemi for the Cutlass. I'll probably run both engines this year.

Although, running 6.50's at 3200+ lbs with a smooth idling, pump gas motor through the mufflers and going mulitple rounds every time out, it will be hard to mess with that combo.


272" Spitzer
540 Chevy
The Blower Shop XR1
FTI XPM Series Converter
FTI Level 6 Powerglide
3.69@199
.916 60'

2017 Bradenton Heads Up Madness
Open Outlaw Champ

2018 PDRA T/D #5
2019 PDRA T/D #2

2020 Retired From T/D Competition....

2020 Bradenton NMCA Hemi Shootout Winner

2021 getting back into bracket racing with a Gen3 Hemi powered 87 Cutlass.
 
Posts: 3103 | Location: Yes | Registered: July 08, 2009Reply With QuoteReport This Post
DRR Sportsman
posted Hide Post
Dragster
Rewire
New dash with iq3
Mega 475 with dial board
Onboard air compressor
slicks
rear gears
Oils/filters

Vega
Rewire
Ignition that will control timing
Onboard air compressor
High gear brake
Oils/fluids

Cutlass
Valve springs
Oil/fluids
Maybe onboard air compressor
Plot the 4link I installed last winter
New rear shocks

My youngest son made the transition from Jr's to Super Pro mid summer so we'll be digging out a backhalf 88 Mustang we haven't run in about 10 years so who knows what that's actually gonna need.

https://imgur.com/a/XQ3Fgdb

This message has been edited. Last edited by: SP 124X,


Denis LeBlanc

 
Posts: 504 | Location: Manchester, NH | Registered: February 03, 2006Reply With QuoteReport This Post
DRR Pro
posted Hide Post
I'm going to pull the engine and check the main/rod bearings for wear. I am also going to pull the heads off and install thick headgaskets in the hopes of being able to run cheaper fuel. Take care. Tom Worthington


If it seems that bracket racing has gotten too expensive for you, maybe you are just doing it wrong.
 
Posts: 1279 | Location: Rocky Mount, NC | Registered: December 01, 1999Reply With QuoteReport This Post
DRR Sportsman
Picture of Mike Frizie
posted Hide Post
Motor's up at PAR getting aluminum block upgrade and freshen up.

Looking for a billet carb that works ...... Roll Eyes
May switch back to a terminator set up

Just got my shocks back from Shane @ Competitive Suspension Solutions. Cool


Michael Frizie
ET 2471
 
Posts: 637 | Location: Winston, GA | Registered: April 10, 2002Reply With QuoteReport This Post
DRR Trophy
Picture of dragracer2757
posted Hide Post
ole red digger...rebuild shaft rockers and general service/maintenance,flush brake fluid etc.

black digger... engine freshened @ oakley and possibly 2.500 carb & new tires both cars
 
Posts: 63 | Location: old hickory tn | Registered: December 31, 2003Reply With QuoteReport This Post
DRR Pro
Picture of RacerVX54
posted Hide Post
Valve adjustment,plugs and oil change.... And thats a win. Spent alot in the last 3 years .....


"Just Shut Up and Race"

Brian Martin
Martin Racing
5.50 126
 
Posts: 1421 | Location: Va.Beach .Va | Registered: August 03, 2005Reply With QuoteReport This Post



DRR Pro
posted Hide Post


Find a new crew chief/back-up girl
 
Posts: 1433 | Location: united states | Registered: January 16, 2006Reply With QuoteReport This Post
DRR Elite
posted Hide Post
I’ll take one just like that too. If she can cook and keep the motor home clean even better.
 
Posts: 13522 | Location: NJ | Registered: August 20, 2000Reply With QuoteReport This Post
DRR S/Pro
Picture of "The Bender"
posted Hide Post
quote:
Originally posted by jenavet:


Find a new crew chief/back-up girl


I'll be available.......


272" Spitzer
540 Chevy
The Blower Shop XR1
FTI XPM Series Converter
FTI Level 6 Powerglide
3.69@199
.916 60'

2017 Bradenton Heads Up Madness
Open Outlaw Champ

2018 PDRA T/D #5
2019 PDRA T/D #2

2020 Retired From T/D Competition....

2020 Bradenton NMCA Hemi Shootout Winner

2021 getting back into bracket racing with a Gen3 Hemi powered 87 Cutlass.
 
Posts: 3103 | Location: Yes | Registered: July 08, 2009Reply With QuoteReport This Post
DRR S/Pro
Picture of Big Steve
posted Hide Post
Just got my engine back together after a rod swap. Freshened the trans, added a external converter dump valve to play with on the launch. Also adding a 2nd AC to the trailer, a mini split to make it a little more comfortable in the Texas heat since we live in it at the track most of the time.
Fired it up this weekend and did a couple of heat cycles now I need to strip the valve train back off an re torque the heads.
First warm up https://www.youtube.com/watch?v=SKybciOlvac
 
Posts: 2543 | Location: Moving back to the door side | Registered: April 30, 2010Reply With QuoteReport This Post
DRR Pro
Picture of HS professor
posted Hide Post



For some odd reason I bought this thing Roll Eyes
Gotta figure out what direction I wanna go with it. Hope to have it out some time this season. It's light, real light .........
 
Posts: 1422 | Location: Monroe twp nj | Registered: December 05, 2005Reply With QuoteReport This Post
DRR Pro
Picture of Paul S/Q
posted Hide Post
quote:
Originally posted by jenavet:


Find a new crew chief/back-up girl


Ummm I dont see ANYTHING wrong with that one..
 
Posts: 787 | Location: hopefully pickin up a check in the winners circle | Registered: November 29, 2006Reply With QuoteReport This Post
DRR Pro
Picture of Paul S/Q
posted Hide Post
hoping to finally get a chance to get the 2022 Miller T/D out ..
 
Posts: 787 | Location: hopefully pickin up a check in the winners circle | Registered: November 29, 2006Reply With QuoteReport This Post



DRR S/Pro
Picture of The Bozman
posted Hide Post
Both trans freshened and ringless input shafts and pumps by Abruzzi, getting three convertors redone, one as before, another a little looser and one a lot tighter just to play with.

Motor only has about 110 passes on it so it should be good through the middle of the year.

New slicks and getting a new adjustable wing for the dragster, the current one is hard set at 19 degrees before tire growth, I am sure there is some mph sitting there for me.

Brake pads and new brake fluid in both systems.

Getting more sensors (vacuum, boost, EGT) for the IQ3 and get a button to where I can actually change screens, LOL.

New airbags on the motorhome.


Keeping the Socialists and NEO-LIBERALS at bay with FACTS one post at a time !!!

Freedom isn't free !!! Thank a veteran, they will actually appreciate it.
 
Posts: 2498 | Location: Gilmer, Texas | Registered: June 25, 2002Reply With QuoteReport This Post
DRR Pro
Picture of RacerVX54
posted Hide Post
quote:
Originally posted by HS professor:



For some odd reason I bought this thing Roll Eyes
Gotta figure out what direction I wanna go with it. Hope to have it out some time this season. It's light, real light .........


Love it looks like a nice 598 would fit perfect lol


"Just Shut Up and Race"

Brian Martin
Martin Racing
5.50 126
 
Posts: 1421 | Location: Va.Beach .Va | Registered: August 03, 2005Reply With QuoteReport This Post
DRR Pro
posted Hide Post
As much pre-race prep as I can. 36 races (including double entries) scheduled. All within 110 miles of home. 3-$25K, 4-$11K, 9-$7K, 6-$5K. Iowa has some great bracket racing coming this season. Hope the lil 406 has another 350 runs in it.
Jok


www.trailertoad.com designed by racers for racers.

 
Posts: 1237 | Location: Janesville, IA | Registered: December 21, 2004Reply With QuoteReport This Post
DRR S/Pro
posted Hide Post
quote:
Originally posted by jenavet:


Find a new crew chief/back-up girl



Mikey, why are you so hard on crew chiefs??? Big Grin
 
Posts: 2163 | Location: Tewksbury, MA,USA | Registered: November 03, 2000Reply With QuoteReport This Post
DRR Pro
posted Hide Post
quote:
Mikey, why are you so hard on crew chiefs???

they are like aluminum rods...after so many hard runs you gotta replace em
 
Posts: 1433 | Location: united states | Registered: January 16, 2006Reply With QuoteReport This Post
DRR Elite
Picture of adv ET 266
posted Hide Post
New ride this year. In Red
https://www.canyon.com/en-ie/r...9-disc-di2/2953.html



2005 2000lb 4 link dragster
home brew 582 BBC Dart 355
1.058
2.98
4.629@149
6.094
7.310@185

 
Posts: 12175 | Location: 33463 | Registered: February 04, 2004Reply With QuoteReport This Post
  Powered by Social Strata Page 1 2  
 


© DragRaceResults.com 2024