I need a little help in identifying this powerglide valvebody. It has no markings and no gaskets were installed. I see some passages have been modified and plugged but dont know what I am looking at.

This message has been edited. Last edited by: RyanNorton1, March 31, 2019 06:50 PM

I think it is a standard, full tree, valve body with brake.

It does not show in the photo, I am assuming it has a solenoid screwed into the case.

some builders omit the gaskets, others install factory gaskets. To my experience, they work fine either way.

Post an image of the separator plate, Ryan.

Thanks for the info!

Here is a picture Mike.

Try Turbo Action. Looks like the bracket brake in Revis's Nova. His is an OLD Turbo Action.

Consider posting your question and pictures in THIS forum that has much transmission knowledge and advice.

So far Ryan has only mentioned identifying brand.

Do you know the proper solenoid stroke or case to plunger depth for an old Turbo Action bracket brake? Or whatever valve body it ends up being? I don't.

I'm presuming these are the types of questions in play.