DragRaceResults.Com    Bracket Talk    Bracket Talk Forum  Hop To Forum Categories  Tech Talk - by Abruzzi    OEM aluminum Powerglide case.....
Go
New
Find
Notify
Tools
Reply
  
OEM aluminum Powerglide case.....
 Login/Join
 
DRR Trophy
posted
Are the cooler outlets on an OEM case tapered pipe thread or straight pipe thread? Seems I've run into a difference of opinion with some powerglide builders.
 
Posts: 90 | Location: Mooresville, nc | Registered: October 11, 2013Reply With QuoteReport This Post
DRR Pro
posted Hide Post
All OE Aluminum cases are 1/8 pipe tapered [NPT] cooler fittings.


Larry Woodfin



 
Posts: 1877 | Location: Kilgore TX | Registered: March 12, 2004Reply With QuoteReport This Post
DRR Top Comp
posted Hide Post
NPT powerglide

NPS Turbo 400
 
Posts: 9398 | Location: Madeira Beach Fl. | Registered: June 12, 2018Reply With QuoteReport This Post
DRR Trophy
posted Hide Post
Thank you.
 
Posts: 90 | Location: Mooresville, nc | Registered: October 11, 2013Reply With QuoteReport This Post
DRR Top Comp
posted Hide Post
You're welcome Sir, anytime.
 
Posts: 9398 | Location: Madeira Beach Fl. | Registered: June 12, 2018Reply With QuoteReport This Post
DRR Pro
Picture of rusty
posted Hide Post
there is no thing as straight pipe thread .the other replies are correct


honesty is the best policy,insanity is a better deffense
1.036, 6.16@ 224

 
Posts: 1472 | Location: texas | Registered: February 17, 2006Reply With QuoteReport This Post
  Powered by Social Strata  
 

DragRaceResults.Com    Bracket Talk    Bracket Talk Forum  Hop To Forum Categories  Tech Talk - by Abruzzi    OEM aluminum Powerglide case.....

© DragRaceResults.com 2024