Does anyone know of a jet change tool that fits the larger alcohol sized jets
The difference between ignorance and stupidity. Ignorance is lack of knowledge. Stupidity is the inability to learn. Don't be stupid
August 21, 2023, 03:49 PM
434 olds
quote:
Originally posted by vetman: Does anyone know of a jet change tool that fits the larger alcohol sized jets
Hex head jets?
Worlds Quickest And Fastest 71 Cutlass On The Planet Earth
August 21, 2023, 03:58 PM
1320racer
Nut driver
August 22, 2023, 09:31 AM
Rodney Pryor
I have some newer round jets that are larger than the traditional Holley jets. I've just used a larger screw driver and been careful.
August 22, 2023, 09:40 AM
CURTIS REED
I made my own and it's pretty easy. I took a piece of brass and made one end to press on the wide slot part of this screwdriver and bored the other end to just fit over the larger alcohol jets. That way it can't slip off and mess up your jets. You might need a machinist friend to do it. Works perfectly.
I have since started buying the hex jets from BLP. They have them in short for primary and long for secondary.
____________________________ 2017 and 2018 Osage Casinos Tulsa Raceway Park No-Box Champion
2018 Div4 Goodguys Hammer award winner
August 22, 2023, 01:55 PM
vetman
Thanks for the idea Curtis I can make that up at home
The difference between ignorance and stupidity. Ignorance is lack of knowledge. Stupidity is the inability to learn. Don't be stupid
August 22, 2023, 07:52 PM
Top355x
Buy a spare dzuz tool and grind sides down to narrow it up some or craftsmen use to make a really wide short screwdriver don’t know if there still available from anywhere
August 23, 2023, 06:38 AM
CURTIS REED
____________________________ 2017 and 2018 Osage Casinos Tulsa Raceway Park No-Box Champion
2018 Div4 Goodguys Hammer award winner
August 23, 2023, 08:06 AM
B KING
1980 Camaro Taking the Best Working Small Tire Shyt Box & making it Greater Than Before! 3000 lbs. Pump Gas 436
August 23, 2023, 08:43 AM
CURTIS REED
____________________________ 2017 and 2018 Osage Casinos Tulsa Raceway Park No-Box Champion
2018 Div4 Goodguys Hammer award winner
August 23, 2023, 08:48 AM
1320racer
some chose to make it more difficult than it needs to be!
For decades, Jet tools have been and still are readily available for under $30 from Moroso, Holley, Quick Fuel, BLP and numerous chinese offerings, for both slotted and hex jets, for those that don’t own and/or don't know how to use a 3/16" flat blade screw driver or 5/16” nut driver.
I have and use the nut driver since retiring my 3/16" stubby screwdriver 4 years ago from jet install/removal duty This message has been edited. Last edited by: 1320racer,
August 23, 2023, 08:59 AM
TomR
I'm not fond of Jegs brand stuff (China) but a quick search came up with this tool. It has good reviews. I don't know if its good or bad but it's on sale.
Originally posted by TomR: I'm not fond of Jegs brand stuff (China) but a quick search came up with this tool. It has good reviews. I don't know if its good or bad but it's on sale.
The link states it's made in the USA, but I don't always believe it.
2BKING
1980 Camaro Taking the Best Working Small Tire Shyt Box & making it Greater Than Before! 3000 lbs. Pump Gas 436
August 23, 2023, 09:42 AM
CURTIS REED
quote:
Originally posted by 1320racer: and for the record, I have no issue with anyone having a "differing of opinion" providing that opinion comes from their/your 1st hand experience that you can speak to. Otherwise it's internet forum hearsay, rumor and misinformation.
Seems to not be the case.
quote:
Originally posted by 1320racer: some chose to make it more difficult than it needs to be!
For decades, Jet tools have been and still are readily available for under $30 from Moroso, Holley, Quick Fuel, BLP and numerous chinese offerings, for both slotted and hex jets, for those that don’t own and/or don't know how to use a 3/16" flat blade screw driver or 5/16” nut driver.
I have and use the nut driver since retiring my 3/16" stubby screwdriver 4 years ago from jet install/removal duty
Nice delete and reorder of the replies.
3/16" stubby screwdriver is just asking to mess up the slot in an alcohol jet. For gas it's fine but that's just bad advice.
____________________________ 2017 and 2018 Osage Casinos Tulsa Raceway Park No-Box Champion
2018 Div4 Goodguys Hammer award winner
August 23, 2023, 09:46 AM
1320racer
you're a retard if you can't remove a slotted jet without boogering up the slot
August 23, 2023, 01:08 PM
vetman
So much for Mr. Woodfins request seems a scumbucket jackass reply is all 1290 has in his pockets except his hands playin pocket pool-which he always loses at-that nasty cum sucker he is blow me *******-maybe this will get Scotts attention
The difference between ignorance and stupidity. Ignorance is lack of knowledge. Stupidity is the inability to learn. Don't be stupid
August 23, 2023, 02:21 PM
1320racer
^^^clearly a miserable, troubled old man full of hate who loses his shyt over the FACTS and the TRUTH about jet tools.
August 23, 2023, 03:08 PM
TomR
WTF, why do you insist on putting people down when they ask a ****ing question? The op asked a question, it's been answered yet you obviously want your post count to keep going up so you keep poking and prodding then accuse others of antagonizing you.
72 Nova "Hooptie"
August 23, 2023, 03:15 PM
1320racer
Another that only replies because I posted and offers nothing of relevance to the OP!
No one was "put down". I stated my opinion on a internet forum where everyone that replies posts their opinion, that you're a retard if you can't remove a slotted jet without boogering up the slot.
Further, I have NOT accuse others of antagonizing me.
August 23, 2023, 06:02 PM
B KING
quote:
Originally posted by 1320racer: you're a retard
Ed uses "retard", because it reminds him of himself! Ed, clearly taking off where he left off, driving/racing like a "retard".
Sat. 1st round loss 6:42:00, with a "retard" .206 reaction!
some chose to make it more difficult than it needs to be!
This message has been edited. Last edited by: 1320racer, 
