Go
New
Find
Notify
Tools
Reply
  
BBC Dart Pro 1
 Login/Join
 
DRR S/Pro
posted
What plugs does this head take? 14mm X .750?
540 inches CB324 IR-10 Comp cam
Bracket car. 1050 carb Sunoco fuel
Helping a friend

This message has been edited. Last edited by: BP758,


California Screaming!
Raceless in California!
 
Posts: 4673 | Location: Vacaville  | Registered: January 07, 2004Reply With QuoteReport This Post
DRR S/Pro
Picture of Lenny5160
posted Hide Post
NGK R5671A in your heat range of choice.

14mm thread diameter, .750” reach. Non-projected tip.


Tony Leonard
 
Posts: 3251 | Location: Inver Grove Heights, MN | Registered: March 18, 2004Reply With QuoteReport This Post
DRR S/Pro
posted Hide Post
Thanks Lenny. Nobody runs extended tip? Like a 3310??? too close?


California Screaming!
Raceless in California!
 
Posts: 4673 | Location: Vacaville  | Registered: January 07, 2004Reply With QuoteReport This Post
DRR S/Pro
Picture of SCDIV1
posted Hide Post
Depending on the piston dome....an extended tip plug is gonna hit

Never use them in a full dome BB OC headed engine

Most newer pistons have a notch for the plug but I still would not use extended tip plugs....
 
Posts: 2735 | Location: Where ever I am, I'm here and it's me | Registered: March 15, 2007Reply With QuoteReport This Post
DRR S/Pro
posted Hide Post
Thanks Guys. I’ll Try and find his build sheet. One of his friends had 45 deg of timing Shake head in it! We’ll see if we can get him a safe tune and make it live.
I Had no idea what plug it took and what most run. Our bbc TS motors have no dome.


California Screaming!
Raceless in California!
 
Posts: 4673 | Location: Vacaville  | Registered: January 07, 2004Reply With QuoteReport This Post
  Powered by Social Strata  
 


© DragRaceResults.com 2024