DragRaceResults.Com    Bracket Talk    Bracket Talk Forum  Hop To Forum Categories  Tech Talk - by Abruzzi    Edelbrock BV3 cylinder head
Go
New
Find
Notify
Tools
Reply
  
Edelbrock BV3 cylinder head
 Login/Join
 
DRR Trophy
Picture of Fabman
posted
Wondering if anyone here has tried running the Edelbrock BV3 cylinder head on a bracket bbc.

I know of 3 locals guys running this head, two are nitrous heads up combinations, one is a N/A heads up deals.

Both nitrous combinations use heads prepared by BES. The N/A combination I believe was from Schmidt.

One thing I know for sure is getting castings has been an issue in the past.

The reason I ask is I know some say the 9 degree head may or may not make more power than other BBC symmetrical port heads. The BV3 is an 11 degree and BES offers their own cast/single 4 intake that was a joint venture with Uratchko.

Just curious if some of the fast bracket cars have tried the BV3 to compare.
 
Posts: 277 | Location: USA | Registered: August 27, 2022Reply With QuoteReport This Post
  Powered by Social Strata  
 

DragRaceResults.Com    Bracket Talk    Bracket Talk Forum  Hop To Forum Categories  Tech Talk - by Abruzzi    Edelbrock BV3 cylinder head

© DragRaceResults.com 2024