DragRaceResults.Com    Bracket Talk    Bracket Talk Forum  Hop To Forum Categories  Tech Talk - by Abruzzi    598 tall deck build
Go
New
Find
Notify
Tools
Reply
  
598 tall deck build
 Login/Join
 
DRR Trophy
Picture of 7959
posted
which rod for a 598 tall deck 6.535 or 6.700
Dragster
 
Posts: 26 | Location: Denver, CO | Registered: August 13, 2001Reply With QuoteReport This Post
DRR Trophy
Picture of sammy christian
posted Hide Post
6.700 or you'll have a pretty heavy piston. unless it's blown Wink


6.41@221 (so far)
4.11@178
off the shelf/built it myself
 
Posts: 82 | Location: Amherst, Ny | Registered: May 14, 2001Reply With QuoteReport This Post
DRR Sportsman
Picture of Stephen Hughes
posted Hide Post
Not sure why it was originally done but mine has 6.800


The Pull-Out....for when you want to work smarter, not harder!!!
 
Posts: 337 | Location: Texas | Registered: September 12, 2005Reply With QuoteReport This Post
DRR Sportsman
Picture of Bad News
posted Hide Post
Ran a 4.500,6.535 with a 1.395 in a tall deck for 860 some runs, no issues. Chamfer the bottom of the holes and dont get too much over .008 pw. It will run just fine.
Just about everything will run, and run decent. Some combos better than others but it will be ok.
Will you actually see the difference between a 6.535 or a 6.7 or a 6.8, probably not.
Got a 6.665 right now on a 4.5 and it is so close to the old 6.535 combo except for a tad more camshaft. Just a little faster, but the same cubic inches. dont sweat it.
 
Posts: 868 | Location: ft laud | Registered: September 02, 2004Reply With QuoteReport This Post
DRR Sportsman
Picture of TD3550
posted Hide Post
With the 6.700 you should have a 1.245 CH. Unless it's a spec piston. No worry, you'll be good to go.Just curious, what/who's piston?
 
Posts: 1421 | Location: Under a Truck | Registered: August 23, 2013Reply With QuoteReport This Post
DRR Trophy
Picture of 7959
posted Hide Post
Thanks for the input everyone!
quote:
Originally posted by TD3550:
With the 6.700 you should have a 1.245 CH. Unless it's a spec piston. No worry, you'll be good to go.Just curious, what/who's piston?
Gibtec
 
Posts: 26 | Location: Denver, CO | Registered: August 13, 2001Reply With QuoteReport This Post
DRR S/Pro
posted Hide Post
quote:
Originally posted by Stephen Hughes:
Not sure why it was originally done but mine has 6.800


Lighter pistons
 
Posts: 2163 | Location: Tewksbury, MA,USA | Registered: November 03, 2000Reply With QuoteReport This Post



  Powered by Social Strata  
 

DragRaceResults.Com    Bracket Talk    Bracket Talk Forum  Hop To Forum Categories  Tech Talk - by Abruzzi    598 tall deck build

© DragRaceResults.com 2024