DragRaceResults.Com    Bracket Talk    Bracket Talk Forum  Hop To Forum Categories  Tech Talk - by Abruzzi    Mopar master cylinder for Disc Drum
Go
New
Find
Notify
Tools
Reply
  
Mopar master cylinder for Disc Drum
 Login/Join
 
DRR Trophy
posted
Anyone have the number for the correct mopar type master cylinder for a disc drum system? wilwood states i need a 1 1/8 bore, manual brakes
 
Posts: 22 | Location: ohio | Registered: August 15, 2017Reply With QuoteReport This Post
DRR Sportsman
Picture of sr4440
posted Hide Post
https://www.dragstuff.com/tech...cingMasterCylPN.html


Without data, you’re just another guy with an opinion.
 
Posts: 1313 | Location: TEXAS | Registered: February 07, 2003Reply With QuoteReport This Post
DRR Sportsman
posted Hide Post
We have run the Cordoba 1 1/32 on our 64 Polara for years. Front discs and rear drums.

Car runs 11.0's 1/4 mile. Plenty of brakes with the smaller size master cylinder with our setup.

The 1 1/8 bore one would be a touch better.
 
Posts: 457 | Location: coquille,or | Registered: November 18, 2003Reply With QuoteReport This Post
DRR Sportsman
Picture of KWig
posted Hide Post
I used a mc for an 80 Dodge Ramcharger with 360. Had no issues with it at all. Same setup, disc/drum. 3400 lb stocker.


You have to put in the effort, to get anything out of it.
 
Posts: 736 | Location: Cumming Ga | Registered: January 07, 2007Reply With QuoteReport This Post
  Powered by Social Strata  
 

DragRaceResults.Com    Bracket Talk    Bracket Talk Forum  Hop To Forum Categories  Tech Talk - by Abruzzi    Mopar master cylinder for Disc Drum

© DragRaceResults.com 2024