DRR Sportsman
| |
| Posts: 654 | Location: Here | Registered: November 15, 2012 |
IP
|
|
DRR Pro
| quote: Originally posted by Wooley: Looking for a throttle cable bracket for an older Chevy. I have a Holley 750 vacuum secondary on a 350 sbc. I have installed a 700r4 but haven’t found a good bracket for the throttle and transmission cable. I got one from summit that’s not going to work. It just uses one stud to attach so it will swing forward some at wot. Plus it appears way too short to correctly attach the cable from the transmission. Any suggestions on what you have used that fits and works are welcome. Thanks.
I tried a couple of aftermarket setups before I went junkyard and used a GM bracket, just had to make a modification on the throttle lever to get the correct length and arc.
"Despite the high cost of living, it remains popular." Dave Cook N375
|
| |
DRR S/Pro
| I have a bucket of takeoff parts. I'll try and remember to look when I go to the shop tomorrow. |
| |
DRR S/Pro
| I dug around, I have 2 different GM factory throttle cable/ trans cable brackets. PM me your # and I'll send you pics of what I have. |
| |