DragRaceResults.Com    Bracket Talk    Bracket Talk Forum  Hop To Forum Categories  Tech Talk - by Abruzzi    3rd gen Camaro header Stahl/ACP or other?
Go
New
Find
Notify
Tools
Reply
  
3rd gen Camaro header Stahl/ACP or other?
 Login/Join
 
DRR Pro
posted
Anyone have the ACP headers for SBC? 1 7/8 x 2 x 3 1/2.

Or other header suggestions?


Larry Woodfin



 
Posts: 1882 | Location: Kilgore TX | Registered: March 12, 2004Reply With QuoteReport This Post
DRR Pro
Picture of chasracer
posted Hide Post
We use a straight 1 7/8" Hooker set on our 3rd gen. 434 CI, it can run 5.90's in good air. Headers are about 12 years old now and still in great shape. We do have to drop them in before the engine goes in though.
 
Posts: 1135 | Location: The problem is not the problem. The problem is your attitude about the problem. Savvy?” ~~ Captain Jack Sparrow ~~ | Registered: August 21, 2000Reply With QuoteReport This Post
DRR Pro
posted Hide Post
We used the Hedman Husler with the flat collector. Perfect fit but you have to use a remote oil filter.


www.trailertoad.com designed by racers for racers.

 
Posts: 1243 | Location: Janesville, IA | Registered: December 21, 2004Reply With QuoteReport This Post
DRR Pro
posted Hide Post
quote:
Originally posted by chasracer:
We use a straight 1 7/8" Hooker set on our 3rd gen. 434 CI, it can run 5.90's in good air. Headers are about 12 years old now and still in great shape. We do have to drop them in before the engine goes in though.


Are you using the stock K member or an aftermarket tubular with these headers?
 
Posts: 2695 | Location: 53056 | Registered: December 30, 2009Reply With QuoteReport This Post
  Powered by Social Strata  
 

DragRaceResults.Com    Bracket Talk    Bracket Talk Forum  Hop To Forum Categories  Tech Talk - by Abruzzi    3rd gen Camaro header Stahl/ACP or other?

© DragRaceResults.com 2024