DragRaceResults.Com    Bracket Talk    Bracket Talk Forum  Hop To Forum Categories  Tech Talk - by Abruzzi    Alternator bracket
Go
New
Find
Notify
Tools
Reply
  
Alternator bracket
 Login/Join
 
DRR Trophy
posted
Who makes the best alt brackets. I have a home made bracket that has worked but is too hard to get tight enough, I am having trouble with throwing belts and squeeling belts. Would like the best low mount Big block alt bracket that I could have by the weekend. Thank you
 
Posts: 216 | Location: NJ | Registered: January 29, 2003Reply With QuoteReport This Post
DRR Pro
Picture of TORQIN
posted Hide Post
Contact Mark with House of Payne! 540 471 0471
 
Posts: 1754 | Location: Houston, Tx. | Registered: November 27, 2008Reply With QuoteReport This Post
DRR Sportsman
Picture of 57 Vette
posted Hide Post
East Coast make a nice low mount bracket.

IHRA ACDELCO Canadian Nationals
Top/et Iron man Champion Wink
Don Davis 57 Corvette Super Gas roadster Cool
SDPC 582 Head Hunter on Alcohol
 
Posts: 268 | Location: Toronto Ont/Surprise AZ | Registered: August 18, 2003Reply With QuoteReport This Post
DRR Elite
posted Hide Post
 
Posts: 13522 | Location: NJ | Registered: August 20, 2000Reply With QuoteReport This Post
DRR Pro
Picture of HS professor
posted Hide Post
https://www.jegs.com/i/Powermaster/713/8-882/10002/-1



Been using this for years in various cars. Never lost a belt, ever. They sell just the bracket also.

And we rarely need to charge the battery too .........

This message has been edited. Last edited by: HS professor,
 
Posts: 1422 | Location: Monroe twp nj | Registered: December 05, 2005Reply With QuoteReport This Post
DRR Sportsman
Picture of BD104X
posted Hide Post
When setting up the belt driven accessories lay a long, straight piece of brake line, threaded rod or wooden dowel across the pulleys. It will make any mis-alignment MUCH more obvious than just eye-balling it with the belt on.


Billy Duhs - BD104X@gmail.com
 
Posts: 660 | Location: New Jersey | Registered: February 26, 2000Reply With QuoteReport This Post
DRR Sportsman
Picture of blasttime
posted Hide Post
Had there mid mount worked great http://www.alangrovecomponents.com/Catalog.htm
 
Posts: 16 | Location: canada | Registered: January 01, 2009Reply With QuoteReport This Post



DRR Sportsman
posted Hide Post
Made my own.
Bolts to lower 7/16-14 holes on block and adj mounts to the water pump tapped hole.
Alt is mounted backwards.
 
Posts: 700 | Location: Bucks Co Pa | Registered: January 23, 2003Reply With QuoteReport This Post
DRR Top Comp
Picture of Curly1
posted Hide Post
Go to Powermaster web site. Thy have a lot of different brackets with drawings and measurements so you see if it will fit. Also good quality.


https://postimg.cc/gallery/np3zpruo/
"Dunning-Kruger Effect"
-a type of Cognitive bias where people with little expertise or ability assume they have superior expertise or ability. This overestimation occurs as a result of the fact that they do not have enough knowledge to know they don't have enough knowledge.

Before you argue with someone ask yourself, "Is this person mentally mature enough to grasp the concept of a different perspective?" If not there is no point to argue.

4X NE2 CHAMPION. 2020 TDRA NE2 Champion
 
Posts: 4352 | Location: United States of Texas | Registered: April 02, 2011Reply With QuoteReport This Post
DRR Sportsman
Picture of CH.CRAFT
posted Hide Post
I LIKE MY MOROSO VAC. PUMP AND ALTERNATOR BRACKET THAT MOUNTS TO A MEZIERE WATER PUMP, #63838 FOR BBC. VERY NICE BRACKET.


STATE CAPITOL RACEWAY
2017 QUICK-16 TRACK CHAMPION
 
Posts: 54 | Location: SOUTH LOUISIANA | Registered: December 01, 2009Reply With QuoteReport This Post
  Powered by Social Strata  
 

DragRaceResults.Com    Bracket Talk    Bracket Talk Forum  Hop To Forum Categories  Tech Talk - by Abruzzi    Alternator bracket

© DragRaceResults.com 2024